Get Keyless access with push-button start system (if equipped) -> Disabling keyless access function Guide for Subaru XV SUV Third Generation (2022-2026)

(116,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

& Power saving function of ac-

cess key fob

S02AP22

This function stops the access key fob

from receiving signals and helps minimize

the battery consumption of the access key

fob.

1. Press the “

” button twice while hold-

ing the “

” button.

1) LED indicator

2. Confirm that the LED indicator blinks 4

times to notify that the setting is complete.

When the access key fob is in the power

save mode, the keyless access function

and push-button start system will not be

available.

To cancel the power save mode, press one

of the buttons on the access key fob.

& Disabling keyless access

function

S02AP07

WARNING

If you wear an implanted pacemaker

or an implanted defibrillator, per-

form the procedure described in

“By operating the driver’s door”

F2-13 to disable the keyless access

function. If you perform the proce-

dure described in “By operating the

access key fob” F2-12, the opera-

tion of an implanted pacemaker or

implanted defibrillator may be af-

fected by the radio waves from the

transmitter antenna.

When the vehicle is not going to be used

for a long time, or when you choose not to

use the keyless access function, the key-

less access function can be disabled.

NOTE

. The locking and unlocking function

by the remote keyless entry system is

not disabled.

. To start the engine while the func-

tions are disabled, perform the proce-

dure described in “Starting engine”

F9-18.

! Disabling functions

S02AP0701

! By operating the access key fob

S02AP070102

If you have registered a PIN code for PIN

Code Access, you can disable the keyless

access function by operating the access

key fob. For details about registering a PIN

code, refer to “Preparation for registering a

PIN code” F2-10.

1. Open the driver’s door.

2. Rotate the lock lever toward the lock

position.

3. Press and hold the “ ” button and “ ”

button on the access key fob simulta-

neously for more than 5 seconds.

A chirp sound will be heard, and the

function will be disabled.

Keys and doors/Keyless access with push-button start system

2-12

(117,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

! By operating the driver’s door

S02AP070101

1. Sit in the driver’s seat, and close the

door.

2. Push “ ” of the power door locking

switch.

3. Within 5 seconds after step 2 is

performed, open the driver’s door.

4. Within 5 seconds after step 3 is

performed, push “

” of the power door

locking switch twice while the door is open.

5. Within 10 seconds after step 4 is

performed, close and open the driver’s

door twice.

6. Within 10 seconds after step 5 is

performed, push “

” of the power door

locking switch twice while the door is open.

7. Within 10 seconds after step 6 is

performed, close and open the driver’s

door once.

8. Within 5 seconds after step 7 is

performed, close the door.

A chirp sound will be heard, and the

functions will be disabled.

NOTE

In steps 4 and 6, press the power door

locking switch slowly. If the switch is

pressed quickly, the functions may not

be disabled.

! Enabling functions

S02AP0702

When the procedure to disable the func-

tions is performed again, a chirp sound will

be heard, and the functions are enabled.

NOTE

. The keyless access function will be

enabled only if you perform the proce-

dure in the same manner you disabled

the function (for example, when dis-

abling by operating the driver’s door,

the function will not be enabled even if

you operate the access key fob).

. Press the push-button ignition

switch if you do not know the proce-

dure in which the keyless access func-

tion was disabled.

– When disabling by operating the

driver’s door: A chirp will not be

heard.

– When disabling by operating the

access key fob: A chirp will be

heard.

& Selecting audible signal op-

eration

S02AP12

Using an electronic chirp, the system will

give you an audible signal when the doors

lock and unlock. If desired, you may turn

the audible signal off. For more details,

contact a SUBARU dealer.

NOTE

For models with the combination meter

display (color LCD), the setting can be

changed by operating the combination

meter display (color LCD). For details,

refer to “Vehicle Setting” F3-42.

& Warning chimes and warning

indicator

S02AP06

The keyless access with push-button start

system sounds a warning chime and

flashes the access key warning indicator

on the combination meter in order to

minimize improper operations and help

protect your vehicle from theft.

For details, refer to “Warning chimes and

warning indicator of the keyless access

with push-button start system” F3-24.

– CONTINUED –

Keys and doors/Keyless access with push-button start system

2-13

Keyless access with push-button start system (if equipped) -> Disabling keyless access function for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals