Get Keyless access with push-button start system (if equipped) -> Unlock using PIN Code Access Guide for Subaru XV SUV Third Generation (2022-2026)

(114,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

& Unlock using PIN Code Ac-

cess

S02AP21

When all doors including the rear gate are

locked, you can unlock the doors (includ-

ing rear gate) without a key by pressing the

rear lock button.

1) Rear lock button

NOTE

PIN Code Access will be helpful if the

key fob is accidentally left in the

vehicle. It is recommended that a 5-

digit security code (PIN code) be regis-

tered.

! Preparation for registering a PIN

code

S02AP2101

1. Turn off the ignition switch.

2. Close all doors (including rear gate).

3. Press and hold the “

” button on the

access key fob. Then all doors (including

rear gate) will be locked.

4. Keep the “

” button pressed, and

press the rear lock button within 5 seconds

after step 3.

5. Press and hold the rear lock button for

more than 5 seconds. Confirm a chirp

sound.

6. Release the “

” button and rear lock

button.

7. Press the “

” button on the access key

fob while the chirp sounds.

Then the chirp will stop and the prepara-

tion is complete.

NOTE

Press the “

” button within 30 seconds

of step 6 to end the preparation mode

and move on to the registration stage.

Unless the “

” button is pressed within

30 seconds after step 6, the PIN code

registration will be canceled.

! Registration for a PIN code

S02AP2102

For example, to register “32468” as the

PIN code, perform the following proce-

dure.

1. Press the rear lock button three times.

2. After a chirp sounds once, press the

rear lock button twice.

3. After a chirp sounds once, press the

rear lock button four times.

4. After a chirp (ding) sounds once, press

the rear lock button six times.

5. After a chirp (ding) sounds once, press

the rear lock button eight times.

6. Perform steps 1 to 5 again within

approximately 30 seconds after the chirp

starts sounding intermittently.

7. All doors will be unlocked and locked.

Then the PIN code will be registered.

NOTE

. Press the rear lock button ten times

to enter “0”.

. Change the PIN code frequently to

protect your vehicle from theft.

. If you have lent your vehicle to

another person, confirm that the PIN

code has not been changed or deleted.

If the PIN code has been changed or

deleted, reregister a new PIN code.

. If you make an error during the

registration procedure, press the “

”

Keys and doors/Keyless access with push-button start system

2-10

(115,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

or “ ” button on the access key fob.

Then, start over from the procedure

described in “Preparation for register-

ing a PIN code”.

. To protect your vehicle from theft,

you cannot register a string of the same

five numbers together, such as

“00000”, nor “12345” as a PIN code.

. Do not register your vehicle license

plate number or simple numbers such

as “11122” or “12121” as a PIN code.

Doing so will increase the risk of

vehicle theft.

. When you try to register “22222”, the

registered PIN code will be deleted. You

cannot unlock the doors by PIN Code

Access until a new code is registered.

. After registering a new PIN code,

make sure that you can unlock the

doors using the PIN code.

. The PIN code cannot be deleted

while the keyless access function is

disabled by operating the access key

fob.

. Reregister the PIN code in the fol-

lowing case.

– When you forget the PIN code

– When you want to change the PIN

code

! Unlocking

S02AP2103

Perform steps 1 to 5 described in “Regis-

tration for a PIN code”.

NOTE

. You cannot unlock by PIN Code

Access in the following cases.

– The access key fob is within the

operating ranges.

– The ignition switch is in the

“ACC” or “ON” position.

. If you make an operation error dur-

ing the unlocking procedure, start over

with the unlocking procedure after

waiting for 5 seconds or longer.

. To protect your vehicle from theft, a

buzzer will sound if incorrect PIN codes

are entered five times continuously. If

this occurs, you cannot unlock the

doors by PIN Code Access for 5

minutes.

& Power saving function

S02AP23

The keyless access function will be dis-

abled in the following cases to protect the

access key fob battery and the vehicle

battery.

. Case 1: When the keyless access

function and the remote keyless entry

system have not been used for 2 weeks

or longer while all doors are locked.

Operate one of the following items to

recover the keyless access function:

– Unlock the doors by operating any

procedure other than gripping the front

passenger’s door handle.

– Lock the doors.

– Open a door and then close it.

. Case 2: When the access key fob has

been left in the operating range for 10

minutes or longer while all doors are

locked.

Operate one of the following items to

recover the keyless access function:

– Unlock the doors by gripping the

door handle.

– Unlock the doors by pressing the

rear gate opener button.

– Lock the doors by touching the door

lock sensor.

– Lock or unlock the doors by using

the remote keyless entry system.

– Lock or unlock the doors by using

the power door locking switch.

– Open either of the front doors.

– CONTINUED –

Keys and doors/Keyless access with push-button start system

2-11

Keyless access with push-button start system (if equipped) -> Unlock using PIN Code Access for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals