Get Keyless access with push-button start system (if equipped) -> Locking and unlocking by holding the access key fob Guide for Subaru XV SUV Third Generation (2022-2026)

(110,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

reregistration of an access key fob,

contact a SUBARU dealer.

. For a spare access key fob, contact a

SUBARU dealer.

. Up to 7 access key fobs can be

registered for one vehicle.

. Do not leave the access key fob in

the storage spaces inside the vehicle,

such as the door pocket, dashboard,

inside the corner of the cargo area.

Vibrations may damage the key fob or

turn on the switch, possibly resulting in

a lockout.

. After the vehicle battery is dis-

charged or replaced, initialization of

the steering lock system may be re-

quired to start the engine. In this case,

perform the following procedure to

initialize the steering lock.

(1) Turn the push-button ignition

switch to the “OFF” position. For

details, refer to “Switching power

status” F3-7.

(2) Open and close the driver’s

door.

(3) Wait for approximately 10 sec-

onds.

When the steering is locked, the initi-

alization is completed.

. Do not leave the access key fob in

the following places.

– On the instrument panel

– On the floor

– Inside the glove box

– Inside the door trim pocket

– On the rear seat

– In the cargo area

If you do, the following situations

may occur.

– The access key fob is mistakenly

locked inside the vehicle.

– A false warning issues although

no malfunction actually occurs.

– No warning issues even when

any malfunction occurs.

& Locking and unlocking by

holding the access key fob

S02AP20

When the access key fob is carried within

the operating range, the doors and the rear

gate can be locked/unlocked just by

touching the door handle.

NOTE

The vehicle can also be locked/un-

locked with the remote keyless entry

system. For details, refer to “Remote

keyless entry system” F2-17.

! Operating ranges

S02AP2001

1) Antennas

2) Operating range (approximately 16 to 32

in (40 to 80 cm))

1) LED indicator

Keys and doors/Keyless access with push-button start system

2-6

(111,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

When the access key fob is within either of

the operating ranges of the front doors, the

LED indicator on the access key fob

flashes. When the keyless access func-

tions are disabled, the LED indicator does

not flash unless a button on the access key

fob is pressed.

NOTE

. If the access key fob is placed too

close to the vehicle body, the keyless

access functions may not operate

properly. If they do not operate prop-

erly, repeat the operation from further

away.

. If the access key fob is placed near

the ground or in an elevated location

from the ground, even if it is in the

indicated operating range, the keyless

access function may not operate prop-

erly.

. When the access key fob is within

the operating range, it is possible for

anyone, even someone who is not

carrying the access key fob, to operate

the keyless access function. Note that

the keyless access function can be

operated only by the door handle, door

lock sensor, rear gate opener button or

rear lock button in the operating range

in which the access key fob is detected.

. It is not possible to lock the doors

and rear gate using the keyless access

function when the access key fob is

inside the vehicle. However, depending

on the status of the access key fob and

the environmental conditions, the ac-

cess key fob may be locked inside the

vehicle. Before locking the vehicle,

make sure that you have the access

key fob.

. When the battery of the access key

fob is discharged, or when operating it

in a location with strong radio waves or

noise (e.g., near a radio tower, power

plant, broadcast station or an area

where wireless equipment is used), or

while talking on a cell phone, the

operating ranges may be reduced, or

the keyless access function may not

operate.

In such a case, perform the procedure

described in “Locking and unlocking”

F9-18.

. The doors may lock or unlock when

the car is being washed or exposed to a

significant amount of water that con-

tacts the door handle while the key fob

is still in the operating range.

! How to lock and unlock

S02AP2002

It is possible to perform the following

operations when you are carrying the

access key fob.

. Lock and unlock the doors.

. Unlock and lock the rear gate.

NOTE

. It is not possible to lock the doors

and rear gate using the keyless access

function when the push-button ignition

switch is in the “ACC” or “ON” position.

Refer to “Switching power status” F3-

. If the door handle is gripped with a

gloved hand, the door lock may not be

released.

. If the door lock sensor is touched

three times or more repeatedly, the

system will ignore the sensor opera-

tion.

. When performing the locking proce-

dure too quickly, locking may not have

been completed. After performing the

locking procedure, it is recommended

to pull the REAR door handle to confirm

that the doors have been locked.

. If any of the doors (or the rear gate)

are not fully closed, the following will

occur to alert you that the doors (or the

rear gate) are not properly closed.

– An electronic chirp sounds five

times.

– The hazard warning flashers

flash five times.

. It is possible to lock the doors even

when one of the doors is open. After

– CONTINUED –

Keys and doors/Keyless access with push-button start system

2-7

(112,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

performing the locking procedure,

close the opened door or rear gate to

lock it.

. Within 3 seconds after locking the

doors and the rear gate by using the

keyless access function, it is not pos-

sible to unlock doors and/or the rear

gate by using the keyless access func-

tion.

. When locking, be sure to carry the

access key fob to prevent locking the

access key fob in the vehicle.

. The setting of the hazard warning

flasher operation and the volume of the

audible signal can be changed by your

SUBARU dealer. Contact your SUBARU

dealer for details. Also, for models with

the combination meter display (color

LCD), the setting of the hazard warning

flasher operation can be changed by

operating the combination meter dis-

play (color LCD). For details, refer to

“Keyless Entry System” F3-42.

! Locking with the door lock sensor

S02AP200201

1) Door lock sensor

Carry the access key fob, close all doors

including the rear gate, and touch the door

lock sensor on the door handle. All doors

including the rear gate will be locked. Also,

an electronic chirp will sound once and the

hazard warning flashers will flash once.

! Locking with the rear lock button

S02AP200202

1) Rear lock button

Carry the access key fob, close all doors

including the rear gate and press the rear

lock button. The rear gate and all doors will

be locked. Also, an electronic chirp will

sound once and the hazard warning

flashers will flash once.

Keys and doors/Keyless access with push-button start system

2-8

(113,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

! Unlocking

S02AP200203

Carry the access key fob, and grip the

following door handle.

. The driver’s door handle:

Either only the driver’s door will unlock, or

all doors will unlock.

. The front passenger’s door handle:

All doors and rear gate will be unlocked.

Also, an electronic chirp will sound twice

and the hazard warning flashers will flash

twice.

! Unlocking rear gate

S02AP200204

1) Rear gate opener button

Carry the access key fob, and press the

rear gate opener button. Either only the

rear gate will unlock, or all doors will

unlock. Also, an electronic chirp will sound

twice and the hazard warning flashers will

flash twice.

! Door unlock selection function

S02AP2003

When the door is unlocked using the

keyless access function, only the doors

that were set can be unlocked.

The settings can be changed with the

following methods.

. The setting can be changed by operat-

ing the combination meter display (color

LCD) (if equipped). Refer to “Keyless Entry

System” F3-42.

. The setting can be changed by a

SUBARU dealer.

– CONTINUED –

Keys and doors/Keyless access with push-button start system

2-9

(114,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

& Unlock using PIN Code Ac-

cess

S02AP21

When all doors including the rear gate are

locked, you can unlock the doors (includ-

ing rear gate) without a key by pressing the

rear lock button.

1) Rear lock button

NOTE

PIN Code Access will be helpful if the

key fob is accidentally left in the

vehicle. It is recommended that a 5-

digit security code (PIN code) be regis-

tered.

! Preparation for registering a PIN

code

S02AP2101

1. Turn off the ignition switch.

2. Close all doors (including rear gate).

3. Press and hold the “

” button on the

access key fob. Then all doors (including

rear gate) will be locked.

4. Keep the “

” button pressed, and

press the rear lock button within 5 seconds

after step 3.

5. Press and hold the rear lock button for

more than 5 seconds. Confirm a chirp

sound.

6. Release the “

” button and rear lock

button.

7. Press the “

” button on the access key

fob while the chirp sounds.

Then the chirp will stop and the prepara-

tion is complete.

NOTE

Press the “

” button within 30 seconds

of step 6 to end the preparation mode

and move on to the registration stage.

Unless the “

” button is pressed within

30 seconds after step 6, the PIN code

registration will be canceled.

! Registration for a PIN code

S02AP2102

For example, to register “32468” as the

PIN code, perform the following proce-

dure.

1. Press the rear lock button three times.

2. After a chirp sounds once, press the

rear lock button twice.

3. After a chirp sounds once, press the

rear lock button four times.

4. After a chirp (ding) sounds once, press

the rear lock button six times.

5. After a chirp (ding) sounds once, press

the rear lock button eight times.

6. Perform steps 1 to 5 again within

approximately 30 seconds after the chirp

starts sounding intermittently.

7. All doors will be unlocked and locked.

Then the PIN code will be registered.

NOTE

. Press the rear lock button ten times

to enter “0”.

. Change the PIN code frequently to

protect your vehicle from theft.

. If you have lent your vehicle to

another person, confirm that the PIN

code has not been changed or deleted.

If the PIN code has been changed or

deleted, reregister a new PIN code.

. If you make an error during the

registration procedure, press the “

”

Keys and doors/Keyless access with push-button start system

2-10

Keyless access with push-button start system (if equipped) -> Locking and unlocking by holding the access key fob for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals