Get Before Driving -> Information display (instrument cluster with tachometer) Guide for Suzuki Ignis SUV First Generation (2000-2008)

2-54

BEFORE DRIVING

66RH115

(2) Information switch

(3) Trip meter switch

(4) Brightness control switch

The information display shows the follow-

ing information.

Display (A)

Clock

Display (B)

Thermometer

Display (C)

Warning and indicator messages /

Fuel consumption / Driving range /

Average speed / Driving time

Display (D)

Gear position

(for Auto Gear Shift models) /

Gearshift indicator (if equipped)

Display (E)

Trip meter

Display (F)

Odometer

Display (G)

Fuel gauge

81P31150

When the ignition switch is turned to “ON”

position or the engine switch is pressed to

change the ignition mode to ON, the mes-

sage shown in the above illustration will

appear on the display for several seconds.

Some warning and indicator messages

may appear on the display when the igni-

tion switch is in “ACC” or “LOCK” position,

or the ignition mode is ACC or LOCK

(OFF).

Clock

The display (A) shows the time.

To set the clock, follow “Setting mode”

instructions in this section.

Thermometer

The display (B) shows the thermometer.

The thermometer indicates the outside

temperature.

75RM210

If the outside temperature nears freezing,

the message shown in the above illustra-

tion will appear on the display.

NOTE:

• The outside temperature indication is not

the actual outside temperature when

driving at low speed, or when stopped.

(2)

(3)

(4)

(2)

EXAMPLE

2-55

BEFORE DRIVING

Fuel consumption / Driving range /

Average speed / Driving time

When there are no warning or indicator

messages on the display (C), you can

select one of the following indications to

appear on the display: instantaneous fuel

consumption, average fuel consumption,

driving range, average speed, driving time

or no indication.

66RH100

(a) Instantaneous fuel consumption

(b) Average fuel consumption

(d) Average speed

(e) Driving time

(f) No indication

To switch the display indication, push the

information switch (2) quickly.

NOTE:

The value of fuel consumption, driving

range and average speed shown on the

display are affected by the following condi-

tions;

• Road condition

• Surrounding traffic condition

• Driving condition

• Vehicle condition

• A malfunction which causes the mal-

function indicator light to come on or

blink

Instantaneous fuel consumption

The display shows instantaneous fuel con-

sumption with a bar graph only when the

vehicle is moving.

NOTE:

• The display does not show the bar graph

unless the vehicle is moving.

• Depending on the vehicle’s specification,

the fuel consumption units of initial set-

ting are indicated as L/100km, km/L,

MPG (UK) or MPG (US).

• The indicated maximum value of instan-

taneous fuel consumption is one of the

followings. No more than the maximum

value will be indicated on the display

even if the actual instantaneous fuel

consumption is higher.

– For L/100km setting: 30

– For km/L setting: 50

– For MPG (UK) setting: 80

– For MPG (US) setting: 60

• The indication on the display may be

delayed if fuel consumption is greatly

affected by driving conditions.

• The display shows estimated values.

Indications may not be the same as

actual values.

Average fuel consumption

If you selected average fuel consumption

the last time you drove the vehicle, the dis-

play shows the last value of average fuel

consumption from previous driving when

the ignition switch is turned to “ON” posi-

tion or the engine switch is pressed to

change the ignition mode to ON. Unless

you reset the value of average fuel con-

sumption, the display indicates the value of

average fuel consumption based on the

average fuel consumption during previous

driving.

NOTE:

When you reconnect the negative (–) ter-

minal to the battery, the value of average

fuel consumption will be shown after driv-

ing for a period of time.

(a) (b)

(c)

(d)

(e)

(f)

(

)

(

)

(

)

(

)

(

)

(

)

EXAMPLE

2-56

BEFORE DRIVING

You can select when the value of average

fuel consumption is reset from among the

following three methods;

• Reset after refuel: the value of average

fuel consumption will be reset automati-

cally by refueling.

• Reset with trip meter A: the value of

average fuel consumption will be reset

automatically by resetting trip meter A.

• Reset manually: the value of average

fuel consumption will be reset by push-

ing and holding the information switch

(2) when the display indicates the aver-

age fuel consumption.

To change when the value of average fuel

consumption is reset, refer to “Setting

mode” in this section.

NOTE:

If you add only a small amount of fuel

when you select “Reset after refuel”, the

average fuel consumption value may not

be reset.

Driving range

If you selected driving range the last time

you drove the vehicle, the display indicates

“---” for a few seconds and then indicates

the current driving range when the ignition

switch is turned to “ON” position or the

engine switch is pressed to change the

ignition mode to ON.

The driving range shown in the display is

the approximate distance you can drive

until the fuel gauge indicates “E”, based on

current driving conditions.

When the low fuel warning light comes on,

the display “---” will appear.

If the low fuel warning light comes on, fill

the fuel tank immediately regardless of the

value of driving range shown in the display.

As the driving range after refueling is cal-

culated based on the most recent driving

condition, the value is different each time

you refuel.

NOTE:

• If you refuel when the ignition switch is in

“ON” position or the ignition mode is ON,

the driving range may not indicate the

correct value.

• When you reconnect the negative (–)

terminal to the battery, the value of driv-

ing range will be shown after driving for a

period of time.

Average Speed

If you selected average speed the last time

you drove the vehicle, the display indicates

the last value of average speed from previ-

ous driving when the ignition switch is

turned to “ON” position or the engine

switch is pressed to change the ignition

mode to ON. Unless you reset the value of

average speed, the display indicates the

value of average speed which includes

average speed during previous driving.

To reset the value of average speed, push

and hold the information switch (2) for a

while when the display indicates an aver-

age speed. The display shows “---” and

then indicates a new average speed after

driving for a short time.

NOTE:

When you reconnect the negative (–) ter-

minal to the battery, the value of average

speed will be shown after driving for a

period of time.

Driving time

The display shows the total amount of driv-

ing time since the indication was reset.

• To reset the driving time to zero, push

and hold the information switch (2) for a

while when the display shows the driving

time.

NOTE:

When you reset the indication or reconnect

the negative (–) terminal to the battery, the

driving time will be shown after driving for a

while.

2-57

BEFORE DRIVING

Gear position / Gearshift indicator

The display (D) shows some of the follow-

ing indications.

66RH116

(5) Gear position

(6) Manual mode indicator

(7) Drive mode indicator

Gear position

(for Auto Gear Shift models)

The display shows the current gear posi-

tion (5).

NOTE:

For Auto Gear Shift models, when the

gearshift lever position and the gear posi-

tion indication in the information display

are unmatched, the indication will blink and

the interior buzzer will sound. Refer to

“Auto Gear Shift” in the “OPERATING

YOUR VEHICLE” section for details.

Manual mode indicator

(for Auto Gear Shift models)

When you are using the manual mode, the

display shows the manual mode indicator

(6).

NOTE:

For Auto Gear Shift models, the manual

mode indicator will only appear when the

gearshift lever is in “M”.

Drive mode indicator

(for Auto Gear Shift models)

When the gearshift lever is in “D”, the dis-

play shows the drive mode indicator (7).

For details on how to use the transaxle,

refer to “Using transaxle” in the “OPERAT-

ING YOUR VEHICLE” section.

Gearshift indicator (if equipped)

Refer to “Gearshift indicator” in the

“OPERATING YOUR VEHICLE” section.

Trip meter

The display (E) shows the trip meter.

The trip meter can be used to measure the

distance traveled on short trips or between

fuel stops.

You can use trip meter A or trip meter B

independently.

To reset the trip meter to zero, push and

hold the trip meter switch (3) for a while.

NOTE:

The indicated maximum value of the trip

meter is 9999.9. When you run past the

maximum value, the indicated value will

return to 0.0.

Odometer

The display (F) shows the odometer.

The odometer records the total distance

the vehicle has been driven.

Fuel gauge

The display (G) shows the fuel gauge.

Refer to “Fuel gauge” in this section.

(6) (7)

(5)

EXAMPLE

NOTICE

Keep track of your odometer reading

and check the maintenance sched-

ule regularly for required services.

Increased wear or damage to certain

parts can result from failure to per-

form required services at the proper

mileage intervals.

2-58

BEFORE DRIVING

Setting mode

When the ignition switch is in “ON” position

or the ignition mode is ON and the vehicle

is stationary, you can enter the setting

mode of the information display by pushing

and holding the information switch (2) for

more than 3 seconds.

• To select the setting that you want to

change, push the brightness control

switch (4) up or down.

• To change the setting, push the informa-

tion switch (2).

• To exit the setting mode, select “Back”

and push the information switch (2).

66RH156

NOTE:

The currently selected setting item is sur-

rounded by a frame.

NOTE:

• If you push and hold the information

switch (2) to enter the setting mode

when the display (C) shows average fuel

consumption, average speed or driving

time, the value will be reset simultane-

ously. If you do not want to reset the

value, push the information switch

quickly to switch the indication of the dis-

play.

• If you turn the ignition switch, press the

engine switch or start to move the vehi-

cle when the display is in the setting

mode, the setting mode will be canceled

automatically.

Distance unit

(Odometer / trip meter distance unit setting)

You can change the units in which odome-

ter / trip meter / driving range distance is

displayed.

Fuel economy

(Fuel consumption unit setting)

You can change the units that fuel con-

sumption is displayed in.

Language

You can change the language of the infor-

mation display.

Fuel reset

(Average fuel consumption reset setting)

You can change when the value of aver-

age fuel consumption is reset.

Temperature (Temperature unit setting)

You can change the units that temperature

is displayed in.

NOTE:

When you change the units that tempera-

ture is displayed in, the automatic heating

and air conditioning system (if equipped)

temperature display units will be changed

automatically.

Clock setting (Adjusting the clock)

• To change the hour indication, push the

brightness control switch (4) up or down

repeatedly when the hour indication

appears as reversed color. To change

the hour indication quickly, push and

hold the brightness control switch (4). To

set the hour indication, push the informa-

tion switch (2) and the minute indication

appears as reversed color.

• To change the minute indication, push

the brightness control switch (4) up or

down repeatedly when the minute indi-

cation appears as reversed color. To

change the minute indication quickly,

push and hold the brightness control

switch (4). To set the minute indication,

push the information switch (2).

You can also switch the time indication

between 12-hour and 24-hour format.

EXAMPLE

2-59

BEFORE DRIVING

Door lock (Door lock setting)

• Door unlock

– All Doors:

Unlock all doors by turning the key, or

operating the keyless entry system

transmitter, keyless push start system

remote controller or request switch

once.

– Driver Door:

Unlock all doors by turning the key, or

operating the keyless entry system

transmitter, keyless push start system

remote controller or request switch

twice (default setting).

• Auto lock

– Manual Lock:

Disable the automatic door locking

function.

– Speed Syncro:

Lock all doors when the vehicle speed

reaches 15 km/h (default setting).

• Auto unlock

– Syncro Off:

Disable the automatic door unlocking

function (default setting for the vehicle

with the keyless push start system).

– IG-OFF Sync:

Unlock all doors when the key is

pulled out from the ignition switch or

the engine switch is pressed to

change the ignition mode to LOCK

(OFF) (default setting for the vehicle

without the keyless push start system).

• Alarm

You can turn off or on the siren sound

when the door(s) is(are) locked or

unlocked.

Lights (Light setting)

Lane change (Turn signal lights setting)

The turn signal and its indicator can be set

whether they flash three times even if you

return the turn signal control lever immedi-

ately after moving it.

Antitheft

(Security system setting)

You can switch the security system from

the enabled state to the disabled state, and

vice versa.

The state of the security system is shown

on the information display as follows:

• Mode A: Disabled state

• Mode D: Enabled state

(Shock sensor system setting)

You can change the on/off of the shock

sensor.

(Shock sensor P setting)

You can adjust the pre-warning sensitivity

of shock sensor.

(Shock sensor F setting)

You can adjust the full blast warning sensi-

tivity of shock sensor.

Default (initialization setting)

If you select “YES” and push the informa-

tion switch (2), all settings will be reinitial-

ized.

Warning and indicator messages

The display shows warning and indicator

messages to let you know about certain

vehicle problems.

A tone may also sound to alert you.

If warning and indicator messages appear

on the display, follow the messages.

Master warning indicator light

80P0382

When the display shows warning and indi-

cator messages, the master warning indi-

cator light may also blink.

NOTE:

• When the problem that causes a mes-

sage to appear is corrected, the mes-

sage will disappear.

• If a message is displayed, and other

problems requiring a message occur, the

message for each of the problems will

be alternately displayed about every 5

seconds.

• When you push and hold the information

switch (2) for about 2 seconds while a

message is displayed, the message will

disappear temporarily. If the problem

that caused the message is not cor-

rected, the message will appear again

after 5 seconds.

2-60

BEFORE DRIVING

Warning and indicator messages

All model

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

75RM212

Blinks

(only while vehicle

is in motion)

Beep (one time from interior

buzzer; only while vehicle is

in motion)

A door or tailgate is not properly closed. If in

driving, stop the vehicle in a safe place and

close the door or tailgate properly. (#1)

75RM268

Blinks Continuous beep (from inte-

rior buzzer)

The parking brake is not released. Stop the

vehicle in a safe place and release the parking

brake.

61MM0A172

Blinks Continuous beep (from inte-

rior buzzer)

The headlights and/or the position lights are left

on. Turn them off.

(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.

2-61

BEFORE DRIVING

75RM213

Off Beep (one time from interior

buzzer)

Fuel is low. Refill it immediately. (#1)

66RM02004

Off Off The road may be icy. Drive very carefully. (#1)

(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

2-62

BEFORE DRIVING

Vehicle with keyless push start system

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

61MM0A163

Off Off This message is displayed when the ACC posi-

tion is selected as the ignition mode. (#1)

75RM214

Off Off The brake pedal (for Auto Gear Shift models) or

the clutch pedal (for manual transaxle models)

is depressed. Press the engine switch to start

the engine.

61MM0A168

Blinks Beep (one time from interior

buzzer)

There is a problem with the steering lock sys-

tem.

Have your vehicle inspected by an authorised

Maruti Suzuki workshop.

(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.

2-63

BEFORE DRIVING

75RM215

Blinks Beep (one time from interior

buzzer)

There is a problem with the keyless push start

system. Also, the vehicle battery voltage may

be decreased.

When the message is displayed even if you

start the engine with normal voltage of the vehi-

cle battery, have your vehicle inspected by an

authorised Maruti Suzuki workshop.

75RM216

75RM217

Blinks By certain conditions, some

kind of sound you will hear

from interior and/or exterior

of the vehicle.

The remote controller may be outside the vehi-

cle or its battery may have become discharged.

Locate the remote controller or touch the

engine switch with the remote controller.

If the message still appears, replace the remote

controller battery.

75RM218

Off Off This message is displayed when the ON posi-

tion is selected as the ignition mode. (#1)

(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

2-64

BEFORE DRIVING

75RM219

Blinks Beep (one time from interior

buzzer)

The steering lock is not disengaged. While

lightly turning the steering wheel in both direc-

tions, press the engine switch again.

75RM220

Off Off The remote controller battery is about to

become flat. Replace the battery. (#1)

Manual transaxle

61MM0A166

Off Off The engine switch is pressed without depress-

ing the brake and clutch pedals. Try again as

instructed by the message.

(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

2-65

BEFORE DRIVING

Auto Gear Shift

75RM322

Off Off The engine switch is pressed with the gearshift

lever in a position other than “N” and depress-

ing the brake pedal. Try again as instructed by

message.

Warning and indicator

message

Master warning

indicator light

Sound Cause and remedy

Before Driving -> Information display (instrument cluster with tachometer) for Your Suzuki Ignis SUV First Generation (2000-2008)

Related Topics

Popular Owner Manuals

Latest Owner Manuals