Get OPERATING YOUR VEHICLE -> Cruise control (if equipped) Guide for Suzuki Swift 4 Door Fourth Generation (2023-2026)

OPERATING YOUR VEHICLE

To deactivate the ENG A-STOP sys-

tem

Setting cruising speed

Cruise control switch

EXAMPLE

Cruise control (if equipped)

The cruise control system allows you to

maintain a steady speed without keeping

your foot on the accelerator pedal. The

controls for operating the cruise control

system are on the steering wheel.

(3)

(2)

(1)

You can use the cruise control system

under the following conditions:

• The gearshift lever is in “D” position.

• The vehicle speed is about 40 km/h (25

mph) or higher.

52RM229

Push the ENG A-STOP OFF switch. The

ENG A-STOP OFF light will come on.

WARNING

To help avoid loss of vehicle control,

do not use the cruise control system

when driving in heavy traffic, on slip-

pery or winding roads, or on steep

downhills.

57RK047

ENG A-STOP OFF light

(1) Cruise switch

(2) “CANCEL” switch

(3) “RES +/SET –” switch

If the ENG A-STOP OFF light blinks when

driving, there may be something wrong

with the ENG A-STOP system. You should

have the system inspected by an autho-

rized SUZUKI dealer. For details, refer to

“Warning and indicator lights” in the

“BEFORE DRIVING” section.

Instrument cluster

EXAMPLE

(4)

(5)

57RK048

(4) Cruise indicator

(5) “SET” indicator

3-22

OPERATING YOUR VEHICLE

1) Turn on the cruise control system by

pushing cruise switch (1). When the

cruise indicator light (4) comes on, you

can set cruising speed.

2) Accelerate or decelerate to the desired

speed.

3) Push down the “RES +/SET –” switch

(3), “SET” indicator light (5) comes on.

Take your foot off the accelerator pedal

and the set speed will be maintained.

NOTE:

Changing speed temporarily

When the brake pedal is depressed, “SET”

indicator light (5) will go off until you reset

the cruising speed.

When the cruising speed is maintained, you

can temporarily accelerate or decelerate.

To accelerate, depress the accelerator

pedal. When you take your foot off the pedal,

your vehicle will return to the set speed.

Using “RES +/SET –” switch

To reset at a faster cruising speed, press

repeatedly or hold push up the “RES +/

SET –” switch (3). Vehicle speed will

steadily increase. When you release the

switch, the new speed will be maintained.

To decelerate, depress the brake pedal.

The set speed will be canceled and “SET”

indicator light (5) will go off.

To resume the previously set speed, push

up the “RES +/SET –” switch (3) and turn

on “SET” indicator light (5) again when

vehicle speed is above 40 km/h (25 mph).

The vehicle will accelerate to the previ-

ously set speed and maintain its speed.

WARNING

To reset at a slower cruising speed, press

repeatedly or hold push down the “RES +/

SET –” switch (3) until the vehicle has

slowed to the desired speed, and then

release the switch. The new speed will be

maintained.

If the cruising speed is set by acci-

dent, you cannot decelerate or could

loose control of the vehicle. This

could lead to an accident, resulting in

severe injury or death.

Turn off the cruise control system

and check that cruise indicator light

(4) is off when the system is not in

use.

NOTE:

Changing cruising speed

You can adjust the set speed by approxi-

mately 1 km/h (1 mph) by pushing “RES +/

SET –” switch quickly.

Using the accelerator pedal

To reset at a faster cruising speed, acceler-

ate to the desired speed using the accelera-

tor pedal and push down the “RES +/SET –”

switch (3). The new speed will be main-

tained.

Using the brake pedal

To reset at a slower cruising speed, decel-

erate to the desired speed using the brake

pedal and push down the “RES +/SET –”

switch (3). The new speed will be main-

tained.

3-23

OPERATING YOUR VEHICLE

WARNING

Cancelling cruise control

Braking

“SET” indicator light (5) will go off and the

cruise control will be canceled temporarily

with the following conditions:

If water gets into the brake devices,

brake performance may become poor

and unpredictable. After driving

through water or washing the under-

side of the vehicle, test the brakes

while driving at a slow speed to see if

they have maintained their normal

effectiveness. If the brakes are less

effective than normal, dry them by

repeatedly applying the brakes while

driving slowly until the brakes have

regained their normal effectiveness.

• Push “CANCEL” switch (2).

• Depress the brake pedal.

• The gear position is changed to “L”

• The vehicle speed falls more than about

20 percent from the set speed.

• Any time the vehicle speed falls below

40 km/h (25 mph).

• When the vehicle skids and ESP is

activated.

To resume the previously set speed, push

up the “RES +/SET –” switch (3) and turn

on “SET” indicator light (5). The vehicle

speed must be above 40 km/h (25 mph)

when the vehicle is not under the above

conditions.

Power-assisted brakes

60G165S

Your vehicle has power-assisted brakes. If

power assistance is lost due to a stalled

engine or other failures, the system is still

fully operational on reserve power and you

can bring the vehicle to a complete stop by

pressing the brake pedal once and holding

it down. The reserve power is partly used

up when you depress the brake pedal and

reduces each time the pedal is pressed.

Apply smooth and even pressure to the

pedal. Do not pump the pedal.

The distance needed to bring any vehicle

to a halt increases with the speed of the

vehicle. The braking distance needed, for

example, at 60 km/h (37 mph) will be

approximately 4 times greater than the

braking distance needed at 30 km/h (19

mph). Start to depress the brake pedal

when there is plenty of distance between

your vehicle and the stopping point, and

slow down gradually.

To turn off the cruise control system, push

cruise switch (1) and check that the cruise

indicator light (4) is off.

Also, if the malfunction indicator light in the

instrument cluster comes on or blinks, the

cruise control system will be turned off.

NOTE:

If you turn off the cruise control system, the

previously set speed in the memory is

cleared. Reset your cruising speed again.

3-24

OPERATING YOUR VEHICLE -> Cruise control (if equipped) for Your Suzuki Swift 4 Door Fourth Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals