AX–12
AUTOMATIC TRANSAXLE (U240E)
–
DIFFERENTIALOIL SEAL
DIFFERENTIAL OIL SEAL
AX0LN–02
ON–VEHICLE REPAIR
1.
2.
DRAIN ATF
REMOVE LH AND RH DRIVE SHAFTS (See page
SA–3)
D07261
D03284
D05870
D03286
3.
REMOVE LH AND RH SIDE OIL SEAL
Using SST, drive out both the side oil seals.
SST 09308–10010
SST
4.
INSTALL LH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09350–32014 (09351–32130, 09351–32150)
Oil seal drive in depth: 2.7± 0.5 mm (0.106 ± 0.020 in.)
(b) Coat the oil seal lip with MP grease.
SST
5.
INSTALL RH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09223–00010
Oil seal drive in depth: 0 ± 0.5 mm (0 ± 0.020 in.)
(b) Coat the oil seal lip with MP grease.
6.
INSTALL LH AND RH DRIVE SHAFTS (See page
SA–12)
FILL ATF AND CHECK ATF LEVEL (See page DI–62)
SST
7.
AVENSIS/CORONA SUP (RM781E)
English 