Machine Translated by Google
USER MAINTENANCE: Engine and chassis
374
The ILSAC (International Lubricant Standardization
and Approval Committee) certification mark is
displayed on the front of the container.
Diesel engine –
"Toyota Genuine Motor Oil" is used in your vehicle.
Toyota recommends using the tested "Toyota
Genuine Motor Oil". Another oil of the same quality
can also be used.
Oil class:
Except for the 1AD–FTV engine with DPR catalyst –
API service symbol
ACEA B1, API CF–4 or CF
(You can also use the CE or CD API.)
1AD–FTV engine with DPR catalyst –
RECEIVE DL–1
Recommended viscosity (SAE):
5W–30 Recommended
ILSAC certification mark
Oil identification marks
Estimated temperature range before the
next oil change.
Oil containers are labeled with one or both API
registered marks to assist you in your oil
selection.
SAE 5W–30 is the best choice for low fuel
consumption and good starting in cold weather.
The API service symbol is located anywhere on the
outside of the container.
If you use SAE 10W-30 or higher viscosity oil at very
low temperatures, the engine may be difficult to
start, so we recommend using SAE 5W-30 oil.
The upper part of the label determines the quality of the oil
according to the API (American Petroleum Institute) with
the designation, for example, SM. The middle part of the
label specifies the SAE viscosity grade, such as SAE 5W–30.
The inscription "Energy-Conserving" in the lower
part informs that these oils will have better
properties in terms of fuel saving.
English 
