Get CONTROLS -> Climate control Guide for Toyota Supra 2 Door Fifth Generation (2020-2025)

226

3-1. CONTROLS

Climate control

Safety notes

WARNING

Vehicle features and

options

When using the air conditioning

system, seat heaters, etc. for a

long period of time, make sure

that no body parts are kept near

the air outlets or in direct contact

with the seat, as doing so may

lead to minor burns or chill burns.

If you feel unusual while using the

air conditioning system or seat

heaters, stop use or change the

setting immediately.

This chapter describes all stan-

dard, country-specific and

optional features offered with

the series. It also describes fea-

tures and functions that are not

necessarily available in your

vehicle, e.g., due to the selected

options or country versions. This

also applies to safety-related

functions and systems. When

using these functions and sys-

tems, the applicable laws and

regulations must be observed.

Air conditioning system

refrigerant

 A label regarding the refriger-

ant of the air conditioning sys-

tem is attached to the hood at

the location shown in the fol-

lowing illustration.

Interior air quality

The air quality in the vehicle is

improved by the following com-

ponents:

 Emission tested car's interior.

 Microfilter.

 Air conditioning system to

control the temperature, air

flow and recirculated-air

mode.

 The meaning of each symbol

on the label are as follows:

 Automatic recirculated-air

control AUC.

Caution

 Parked-car ventilation.

Air conditioning sys-

tem

Air conditioning sys-

tem lubricant type

Supra Owner's Manual_U (from Jul. '20 Prod.)

227

3-1. CONTROLS

Requires registered

technician to service

air conditioning sys-

tem

Climate control functions

Button

Function

Flammable refrigerant

Temperature, refer to

page 228.

NOTICE

■When repairing/replacing

parts of the air conditioning

system

Air-conditioning mode,

see page 228.

Have repair/replacement per-

formed by your Toyota dealer.

When a part of the air conditioning

system, such as the evaporator, is

to be replaced, it must be

3

Maximum cooling, refer

to page 229.

replaced with a new one.

Automatic air condition-

ing

AUTO program, refer to

page 229.

Overview

Recirculated-air mode,

refer to page 230.

Buttons in the vehicle

Switch off, refer to page

228.

Air distribution, man-

ual, refer to page 231.

Defrost and defog the

windshield, refer to

page 231.

Rear window defroster,

refer to page 231.

Supra Owner's Manual_U (from Jul. '20 Prod.)

228

3-1. CONTROLS

Button

Function

Adjusting

Turn the dial clockwise

Seat heating, refer to

page 105.

to increase the tempera-

ture and counterclock-

wise to decrease the

temperature.

Air flow, manual, refer

to page 230.

Via Toyota Supra Command:

1 "My Vehicle"

2 "Vehicle settings"

3 "Climate functions"

Switching on/off

Switching on

4 "Temperature adjustment,

Press any button except for the

following:

upper body"

5 Set the desired temperature.

 Switching off.

Do not rapidly switch between

different temperature settings.

Otherwise, the automatic air

conditioning will not have suffi-

cient time to adjust the set tem-

perature.

 Rear window defroster.

 Seat heating.

Switching off

Complete system:

Air conditioning

Press and hold the but-

ton.

Concept

Temperature

Concept

The air in the car's interior will

be cooled and dehumidified

and, depending on the tempera-

ture setting, warmed again.

The automatic air conditioning

achieves the set temperature as

quickly as possible, if needed,

by using the maximum cooling

or heating capacity, and then

keeps it constant.

The car's interior can only be

cooled with the drive-ready state

switched on.

Supra Owner's Manual_U (from Jul. '20 Prod.)

229

3-1. CONTROLS

Switching on/off

Press the button.

Air conditioning is switched on

with the engine running.

The LED is illuminated with the

system switched on.

Depending on the weather, the

windshield and side windows

may fog up briefly when

Air flows out of the vents to the

upper body region. The vents

need to be open for this.

drive-ready state is switched on.

The air flow can be adjusted

with the program active.

The air conditioning is switched

on automatically with the AUTO

program.

3

AUTO program

When using the automatic air

conditioning, condensation

water develops and collects

underneath the vehicle.

Concept

The AUTO program cools, venti-

lates or heats the car's interior

automatically.

Maximum cooling

The air flow, air distribution and

temperature will be controlled

automatically depending on the

interior temperature and the set-

ting for the desired temperature.

Concept

The system is set to the lowest

temperature, optimum air flow

and recirculated-air mode with

the drive-ready state switched

on.

Switching on/off

General information

Press the button.

The function is available with

external temperatures above

approx. 32 °F/0 °C and with the

drive-ready state switched on.

The LED is illuminated with the

AUTO program switched on.

Depending on the selected tem-

perature and outside influ-

ences, the air is directed to the

windshield, side windows, upper

Supra Owner's Manual_U (from Jul. '20 Prod.)

230

3-1. CONTROLS

recirculated.

body, and into the floor area.

To prevent window fogging,

recirculated-air mode switches

off automatically after a certain

amount of time, depending on

the environmental conditions.

The air conditioning, refer to

page 228, is switched on auto-

matically with the AUTO pro-

gram.

The AUTO program is switched

off automatically, when manual

air distribution is set.

With constant recirculated-air

mode, the air quality in the car's

interior deteriorates and the fog-

ging of the windows increases.

Recirculated-air mode

If there is window condensation,

switch off recirculated-air mode

or defog the windows, refer to

page 231.

Concept

You may react to unpleasant

odors or pollutants in the imme-

diate environment by temporar-

ily suspending the supply of

outside air. The system then

recirculates the air flow within

the vehicle.

Controlling the air flow

manually

Concept

The air flow for climate control

can be adjusted manually.

Operation

Press the button repeat-

edly to select an operat-

ing mode.

General information

To manually adjust air flow

The LED is illuminated when the

recirculated-air mode is

switched on.

switch off AUTO program first.

Operation

When the left LED is illuminated:

Automatic recirculated air mode

Press the left or right

side of the button:

decrease or increase air

flow.

If the pollution sensor detects pol-

lutants in the outside air, the air

mode is automatically changed

from outside air mode to recircu-

lated air mode.

The selected air flow is shown

on the climate control display.

The air flow may be reduced

automatically to save battery

power.

When the right LED is illumi-

nated: Recirculated air mode

The air in the cabin is continuously

Supra Owner's Manual_U (from Jul. '20 Prod.)

231

3-1. CONTROLS

quickly removed from the wind-

shield and the front side win-

dows.

Controlling the air distri-

bution manually

Concept

Switching on/off

The air distribution for climate

control can be adjusted manu-

ally.

Press the button.

The LED is illuminated with the

system switched on.

Operation

The air flow can be adjusted

manually with the system

switched on.

3

Press the button repeat-

edly to select a program:

If there is any window

condensation, press the

button on the driver's

side or switch on the air

conditioning. Make sure

that air can flow to the

windshield.

 Windows, upper body region,

and floor area.

 Upper body region and floor

area.

 Floor area.

 Windows and floor area.

 Windows.

Rear window defroster

Press the button. The

LED lights up.

 Windows and upper body.

 Upper body region.

The function is available with the

engine running.

The selected air distribution is

shown on the climate control

display.

The rear window defroster

switches off automatically after a

certain period of time.

If there is window condensation,

defog the windows, refer to

page P.231.

Microfilter

Defrost windshield and

remove condensation

The microfilter removes dust

and pollen from the incoming air.

Have this filter changed during

vehicle maintenance, refer to

page 301.

Concept

Ice and condensation are

Supra Owner's Manual_U (from Jul. '20 Prod.)

232

Ventilation

3-1. CONTROLS

Front ventilation

Concept

The air flow directions can be

individually adjusted.

Adjusting the ventilation

General information

 Lever for changing the air flow

direction, arrow 1.

 Thumbwheel for variable

opening and closing of the

vents, arrow 2.

The air flow directions can be

adjusted for direct or indirect

ventilation.

Open the vents and position

them to ensure effective climate

control.

Parked-car ventilation

Concept

Direct ventilation

The air flow is directed towards

the passengers. The air flow

heats or cools noticeably,

depending on the adjusted tem-

perature.

The car's interior can be cooled

or heated before driving off with

the parked-car ventilation.

Depending on set temperature

and ambient temperature, the

car's interior is ventilated or pos-

sibly heated using the residual

engine heat.

Indirect ventilation

The air flow is not directed

towards the passengers. The

car's interior is warmed or

cooled indirectly, depending on

the set temperature.

General information

The system can be switched on

and off directly or via a preset

departure time.

The activation time is deter-

mined based on the external

temperature. The system

promptly switches on before the

selected departure time.

Supra Owner's Manual_U (from Jul. '20 Prod.)

233

3-1. CONTROLS

■ Switching on

Functional requirements

Press any button except:

 Rear window defroster.

 Lower air flow button side.

 Seat heating.

 The vehicle is in idle state or

standby state and not in

drive-ready state.

 Battery is sufficiently charged.

If parked-car ventilation is switched

on, the vehicle battery will be dis-

charged. Thus, limit the maximum

activation time to save the vehicle

battery. The system will be avail-

able again after the engine is

 Menu.

■ Switching off

The system switches off after

leaving and locking the vehicle.

started or after a short trip.

Press and hold the bot-

tom button.

3

 Make sure that the vehicle's

date and time are set cor-

rectly.

Via Toyota Supra Command

 Open the vents to allow air to

1 "My Vehicle"

flow out.

2 "Vehicle settings"

3 "Climate functions"

4 "Comfort ventilation"

5 "Activate now"

Switching on/off directly

General information

There are different ways to

switch the system on or off.

Display

The system switches off auto-

matically after a certain period of

time. The system continues to

run for some time after being

switched off.

Symbol

Description

Symbol on the auto-

matic air conditioning

indicates the system is

switched on.

REST is displayed on

the automatic air condi-

tioning. The residual

engine heat is used.

Using the button

■ General information

When the vehicle is in standby

state, the parked-car ventilation

can be switched on or off via the

automatic air conditioning but-

tons.

Supra Owner's Manual_U (from Jul. '20 Prod.)

234

3-1. CONTROLS

6 Set the departure time.

Departure time

7 Select day of the week, if

needed.

Concept

Different departure times can be

adjusted to ensure a comfort-

able interior temperature in the

vehicle at the time of departure.

Activating the departure time

■ Functional requirement

If a departure time is to influ-

ence the switching on of

parked-car ventilation, the

respective departure time must

be activated first.

 One-time departure time: the

time can be set.

The system is switched on once.

 Departure time with week-

day: time and day of the week

can be set.

■ Via Toyota Supra Command

1 "My Vehicle"

2 "Vehicle settings"

3 "Climate functions"

4 "Comfort ventilation"

5 "For departure time"

On the desired weekdays, the sys-

tem will be switched on promptly

before the set departure time.

The departure time is prese-

lected in two steps:

6 Activate the desired depar-

 Set departure times.

ture time.

 Activate departure times.

A minimum of 10 minutes

should pass between set-

Display

ting/activating the departure

time and the planned departure

time to allow a sufficient period

of time for the climate control.

The symbol on the automatic

air conditioning signals an acti-

vated departure time.

Setting the departure time

■ Via Toyota Supra Command

1 "My Vehicle"

2 "Vehicle settings"

3 "Climate functions"

4 "Comfort ventilation"

5 Select the desired departure

time.

Supra Owner's Manual_U (from Jul. '20 Prod.)

CONTROLS -> Climate control for Your Toyota Supra 2 Door Fifth Generation (2020-2025)

Related Topics

CONTROLS

Popular Owner Manuals

Latest Owner Manuals