Get CONTROLS -> Lights Guide for Toyota Supra 2 Door Fifth Generation (2020-2025)

150

3-1. CONTROLS

For this reason, it is strongly

suggested to have the special

windshield replaced by your

Toyota dealer if necessary.

Lights

Vehicle features and

options

This chapter describes all stan-

dard, country-specific and

optional features offered with

the series. It also describes fea-

tures and functions that are not

necessarily available in your

vehicle, e.g., due to the selected

options or country versions. This

also applies to safety-related

functions and systems. When

using these functions and sys-

tems, the applicable laws and

regulations must be observed.

Lights and lighting

Switches in the vehicle

The light switch element is

located next to the steering

wheel.

Supra Owner's Manual_U (from Jul. '20 Prod.)

151

3-1. CONTROLS

to be switched on.

Symbol

Function

If the low beams are switched

on manually, the automatic

headlight control is deactivated.

Lights off.

Daytime running lights.

Activating

Parking lights.

Press the button on the

light switch element.

Automatic headlight

control.

Adaptive light functions.

The LED in the button lights up.

The indicator light in the

instrument cluster is

illuminated when the

low beams are

Low beams.

3

Instrument lighting.

switched on.

System limits

Right roadside parking

light.

The automatic headlight control

cannot serve as a substitute for

your personal judgment of light-

ing conditions.

Left roadside parking

light.

For example, the sensors are

unable to detect fog or hazy

weather. In these situations,

switch the light on manually.

Automatic headlight con-

trol

Concept

Parking lights, low beams

and roadside parking

lights

The low beams are switched on

and off automatically depending

on the ambient brightness, for

instance in tunnels, in twilight or

if there is precipitation.

General information

If the driver's door is opened

when the drive-ready state is

switched off, the exterior lighting

is automatically switched off

after a period of time.

General information

A blue sky with the sun low on

the horizon can cause the lights

Supra Owner's Manual_U (from Jul. '20 Prod.)

152

3-1. CONTROLS

Parking lights

Low beams

General information

Switching on

The parking lights can only be

switched on in the low speed

range.

Press the button on the

light switch element.

The low beams illuminate when

drive-ready state is switched on.

Switching on

The indicator light in the

instrument cluster lights

up.

Press the button on the

light switch element.

Press the button again to switch

on the low beams when the

standby state is switched on.

The indicator light in the

instrument cluster lights

up.

The vehicle is illuminated on all

sides.

Switching off

Do not use the parking lights for

extended periods; otherwise,

they might drain the battery and

it would then be impossible to

switch on drive-ready state.

Depending on the country vari-

ant, the low beams can be

switched off in the low speed

range.

Depending on the surrounding

conditions, the low beam head-

lights may not be able to be

turned off.

Switching off

Press the button on the

light switch element or

switch on the

Press the button on the

light switch element.

drive-ready state.

After the drive-ready state is

switched on, the automatic

headlight control will be acti-

vated.

Roadside parking lights

When the vehicle is parked, a

one-sided roadside parking light

can be switched on.

Supra Owner's Manual_U (from Jul. '20 Prod.)

153

3-1. CONTROLS

Button

Function

Headlight courtesy delay

feature

Right roadside

parking light

on/off.

General information

Left roadside

parking light

on/off.

The low beams stay illuminated

for a particular time if the high

beams are switched on after the

drive-ready state is switched off.

Switching off the roadside park-

ing light:

Setting the duration

Press the button on the

light switch element or

switch on the

Via Toyota Supra Command:

3

1 "My Vehicle"

drive-ready state.

2 "Vehicle settings"

Welcome lights and head-

light courtesy delay fea-

ture

3 "Exterior lighting"

4 "Pathway lighting"

5 Select the desired setting.

Welcome lights

Daytime running lights

General information

Depending on the equipment,

the exterior lighting of the vehi-

cle can be set individually.

The daytime running lights light

up when drive-ready state is

switched on.

Activating/deactivating

Via Toyota Supra Command:

In some countries, daytime run-

ning lights are mandatory, so it

may not be possible to deacti-

vate the daytime running lights.

1 "My Vehicle"

2 "Vehicle settings"

3 "Exterior lighting"

4 Select desired setting:

 "Welcome lights"

Via Toyota Supra Command:

1 "My Vehicle"

2 "Vehicle settings"

3 "Exterior lighting"

Individual light functions are

switched on for a limited time.

Supra Owner's Manual_U (from Jul. '20 Prod.)

154

3-1. CONTROLS

4 "Daytime running lamps"

The setting is stored for the

driver profile currently used.

2 Press and hold the button on

the turn signal lever.

Automatic high-beam

Concept

The Automatic high-beam

detects other traffic participants

early on and automatically

switches the high beams on or

off depending on the traffic situ-

ation.

The indicator light in the

instrument cluster is

illuminated when the

low beams are

switched on.

General information

The headlights are automatically

switched between low beams

and high beams.

The Automatic high-beam

ensures that the high beams are

switched on, whenever the traf-

fic situation allows. In the low

speed range, the high beams

are not switched on by the sys-

tem.

The blue indicator light

in the instrument clus-

ter lights up when the

system switches on the

high beams.

The system responds to light

from oncoming traffic and traffic

driving ahead of you, and to

ambient lighting, for instance in

towns and cities.

Driving interruption with acti-

vated Automatic high-beam: the

Automatic high-beam remains

activated when driving contin-

ues.

The high beams can be

switched on and off manually at

any time.

The Automatic high-beam is

deactivated when manually

switching the high beams on

and off, refer to page 119.

Activating

To reactivate the Automatic

high-beam, press the button on

the turn signal lever.

1

Press the button on the

light switch element.

The LED in the button lights up.

Supra Owner's Manual_U (from Jul. '20 Prod.)

155

3-1. CONTROLS

Deactivating

Adjusting the sensitivity

Pull the turn signal lever for

approximately 10 seconds. The

system responds more sensi-

tively.

A vehicle message is displayed.

Resetting the sensitivity

Pull the turn signal lever again

for approx. 10 seconds. The

sensitivity of the Automatic

high-beam is reset to the factory

settings.

Press and hold the button on the

turn signal lever.

3

Sensitivity of the Auto-

matic high-beam

System limits

General information

The Automatic high-beam can-

not serve as a substitute for the

driver's personal judgment of

when to use the high beams. In

situation that require this, there-

fore switch off manually.

The sensitivity of the Automatic

high-beam can be adjusted.

WARNING

If adjustments have been made or

the sensitivity has been modified,

oncoming traffic may be momen-

tarily blinded. There is a risk of an

accident. If adjustments have

been made and the sensitivity has

been modified, make sure that

oncoming traffic is not momentar-

ily blinded. Switch off the high

beams manually if required.

The system is not fully functional

in the following situations, and

driver intervention may be nec-

essary:

 In very unfavorable weather

conditions, such as fog or

heavy precipitation.

Functional requirements

 When detecting poorly-lit road

users such as pedestrians,

cyclists, horseback riders and

wagons; when driving close to

train or ship traffic; or at ani-

mal crossings.

The setting can only be per-

formed when the vhicle is sta-

tionary. The drive-ready state

must be switched on and the

light must be turned off.

 In tight curves, on hilltops or

in depressions, in crossing

Supra Owner's Manual_U (from Jul. '20 Prod.)

156

3-1. CONTROLS

traffic or half-obscured

oncoming traffic on highways.

Overview

 In poorly-lit towns and cities

or in the presence of highly

reflective signs.

Buttons in the vehicle

 When the windshield in front

of the interior mirror is fogged

over, dirty or covered with

stickers, etc.

Instrument lighting

Functional requirement

Interior lights

The parking lights or low beams

must be switched on to adjust

the brightness.

Reading lights

Settings

Switching the interior

lights on/off

Adjust the brightness

with the thumbwheel.

Press the button.

To switch off permanently: press

the button and hold for approx. 3

seconds.

Interior lights

General information

Switching the reading

lights on/off

Depending on the equipment

version, interior lights, footwell

lights and door entry lighting are

automatically controlled.

Press the button.

Supra Owner's Manual_U (from Jul. '20 Prod.)

CONTROLS -> Lights for Your Toyota Supra 2 Door Fifth Generation (2020-2025)

Related Topics

CONTROLS

Popular Owner Manuals

Latest Owner Manuals