Driving and operating -> Automatic transmission for Your Vauxhall Crossland SUV First Generation (2020-2024)

Driving and operating  
Refilling AdBlue  
Caution  
131  
The first possible warning message  
appears at an AdBlue range below  
1500 miles, shows up at each start  
and each 190 miles range reduction:  
Top up AdBlue: Starting impossible in  
1500 mi  
The following warning message is  
being displayed and cannot be  
dismissed:  
Top up AdBlue: Starting impossible  
Only use AdBlue that complies  
with European standards  
DIN 70 070 and ISO 22241-1.  
Do not use additives.  
Do not dilute AdBlue.  
Otherwise the selective catalytic  
reduction system could be  
damaged.  
Additionally, control indicator Y  
flashes continuously and engine  
cannot be restarted until AdBlue tank  
is being filled with at least 5 l.  
Additionally, control indicator Y  
illuminates continuously and a chime  
sounds with every message pop-up.  
High emission warnings  
At an AdBlue range below 380 miles,  
the following warning message is  
being displayed, shows up at each  
start and each 12 miles range  
reduction:  
Top up AdBlue: Starting impossible in  
380 mi  
Additionally, control indicator Y  
flashes continuously and a chime  
sounds with every message pop-up.  
If the exhaust emission rises above a  
certain value, warnings similar to the  
range warnings will be displayed in  
the Driver Information Centre.  
Requests to have the exhaust system  
checked and finally the  
announcement of the prevention of  
an engine restart are displayed.  
These restrictions are a legal  
requirement.  
Notice  
Whenever a filling pump with a  
nozzle for passenger cars is not  
available at a filling station, use only  
AdBlue bottles or canisters with a  
sealed refill adapter for refilling, to  
prevent splashback and overspill,  
and in order to ensure that the fumes  
from the tank are captured and do  
not emerge. AdBlue in bottles or  
canisters is available in many filling  
Notice  
Consult a workshop for assistance.  
In case of high AdBlue consumption,  
the Driver Information Centre may  
display this warning without the  
previous warning stages.  
The last warning level is entered  
when the AdBlue tank is empty.  
Restart of the engine is not possible.  
132  
Driving and operating  
stations and can be purchased e.g.  
at Vauxhall dealers and other retail  
outlets.  
event, park the vehicle in a space  
with a higher ambient temperature  
until AdBlue is liquified.  
Since AdBlue has a limited  
durability, check the date of expiry  
before refilling.  
Notice  
When unscrewing the protective cap  
from the filler neck, ammonia fumes  
may emerge. Do not inhale as the  
fumes have a pungent smell. The  
fumes are not harmful by inhalation.  
Notice  
Refill the tank to a level of at least  
5 l to ensure that the new AdBlue  
level is being detected.  
It is recommended to fill the AdBlue  
tank completely.  
The vehicle must be parked on a level  
surface.  
The filler neck for AdBlue is located  
behind the fuel filler flap, which is  
located at left rear side of the vehicle.  
In case AdBlue refill is not  
successfully detected:  
1. Continuously drive the vehicle  
for 10 min making sure that  
vehicle speed is always higher  
than 12 mph.  
4. Unscrew protective cap from the  
filler neck.  
5. Open AdBlue canister.  
6. Mount one end of the hose on the  
canister and screw the other end  
on the filler neck.  
7. Lift the canister until it is empty, or  
until the flow from the canister has  
stopped. This can take up to  
5 minutes.  
8. Place the canister on the ground  
to empty the hose, wait 15  
seconds.  
2. If AdBlue refill is detected  
successfully, AdBlue supply-  
driven warnings or limitations will  
disappear.  
If AdBlue refill is still not detected,  
seek the assistance of a workshop.  
If AdBlue must be refilled at  
temperatures below -11 °C, the  
refilling of AdBlue may not be  
detected by the system. In this  
The fuel filler flap can only be opened  
if the vehicle is unlocked.  
1. Switch off ignition.  
2. Close all doors to avoid ammonia  
fumes entering the interior of the  
vehicle.  
3. Release the fuel filler flap by  
pushing the flap 3 167.  
Driving and operating  
133  
9. Unscrew the hose from the filler  
neck.  
M and the number of the selected  
gear indicates manual mode.  
Automatic transmission  
10. Mount the protective cap and turn  
R indicates reverse gear.  
N indicates neutral position.  
P indicates park position.  
The automatic transmission permits  
automatic gearshifting (automatic  
mode) or manual gearshifting  
(manual mode).  
Manual shifting is possible in manual  
mode by tapping the selector lever to  
+ or - 3 134.  
clockwise until it engages.  
Notice  
Dispose of AdBlue canister  
according to environmental  
requirements. Hose can be reused  
after flushing with clear water before  
AdBlue dries out.  
Gear selection  
Transmission display  
Move the selector lever in the shifting  
gate as shown in the illustration  
above.  
The mode or selected gear is shown  
in the Driver Information Centre.  
D and the number of the engaged  
gear indicates automatic mode.  
134  
Driving and operating  
P : park position, wheels are locked,  
engage only when the vehicle is  
stationary and the parking brake  
is applied  
Engine braking  
To utilise the engine braking effect,  
select a lower gear in good time when  
driving downhill, see manual mode.  
Manual mode  
R : reverse gear, engage only when  
the vehicle is stationary  
N : neutral  
Rocking the vehicle  
Rocking the vehicle is only  
permissible if the vehicle is stuck in  
sand, mud or snow. Move the selector  
lever between D and R in a repeat  
pattern. Do not race the engine and  
avoid sudden acceleration.  
D : automatic mode  
M : manual mode  
+ : upshift in manual mode  
-
: downshift in manual mode  
The selector lever is locked in P and  
can only be moved when the ignition  
is on and the brake pedal is applied.  
The engine can only be started with  
the lever in position P or N. When  
position N is selected, press the brake  
pedal or apply the parking brake  
before starting.  
Do not accelerate while engaging a  
gear. Never depress the accelerator  
pedal and brake pedal at the same  
time.  
When a gear is engaged, the vehicle  
slowly begins to creep when the  
brake is released.  
Parking  
Move selector lever out of position D  
towards the left in position M.  
Tap selector lever towards + to shift  
to a higher gear.  
Tap the selector lever towards - to  
shift to a lower gear.  
If a higher gear is selected when  
vehicle speed is too low, or a lower  
gear when vehicle speed is too high,  
the shift is not executed. This can  
cause a message in the Driver  
Information Centre.  
Apply the parking brake and engage  
P.  
Driving and operating  
135  
In manual mode, no automatic  
shifting to a higher gear takes place  
at high engine revolutions.  
If the vehicle battery is discharged,  
start the vehicle using jump leads  
3 208.  
If the vehicle battery is not the cause  
of the fault, release the selector lever.  
Kickdown  
Pressing down the accelerator pedal  
beyond the kickdown detent will lead  
to maximum acceleration  
independent of selected driving  
mode. The transmission shifts to a  
lower gear depending on engine  
speed.  
Gear shifting 3 85.  
1. Apply the parking brake.  
Electronic driving  
programmes  
2. Release the selector lever trim  
from the centre console. Poke  
with a finger into the leather  
socket below the selector lever  
and push the trim upwards.  
Following a cold start, the  
operating temperature  
Fault  
programme increases engine  
speed to quickly bring the  
catalytic converter to the required  
temperature.  
In the event of a fault a message is  
displayed in the Driver Information  
Centre.  
Special programmes  
Vehicle messages 3 95.  
automatically adapt the shifting  
points when driving up inclines or  
down hills.  
Electronic transmission control  
enables only third gear. The  
transmission no longer shifts  
automatically.  
Do not drive faster than 62 mph.  
Have the cause of the fault remedied  
by a workshop.  
In snowy or icy conditions or on  
other slippery surfaces, the  
electronic transmission control  
enables the driver to select  
manually first, second or third  
gear for starting off.  
Interruption of power supply  
In the event of an interruption of  
power supply, the selector lever  
cannot be moved out of the P  
position.