Advanced Driving Assistance Systems -> Rear Vision Camera (RVC) for Your Vauxhall Frontera SUV Third Generation (2024-2026)

Advanced Driving Assistance Systems  
129  
to the bumper on the left or right side)  
displayed as a nearly 135° picture in the  
Information Display.  
The performance of the parking assist  
system can be reduced due to heavy  
loading.  
Special conditions apply if there are  
taller vehicles in the vicinity (e.g. off-  
road vehicles, mini vans, vans). Object  
identification and correct distance  
indication in the upper part of these  
vehicles cannot be guaranteed.  
and the sensors are firmly in place. The  
performance of the parking assist may be  
reduced if the licence plate is bent or a  
licence plate support is used.  
Warning  
The rear view camera does not replace  
driver vision. Note that objects that are  
outside the camera's field of view and  
the parking assist sensors, e.g. below  
the bumper or underneath the vehicle,  
are not displayed.  
Do not reverse or park the vehicle using  
only the rear view camera.  
Always check the surrounding of the  
vehicle before and during driving.  
Low curbs and surface irregularities, e.g.  
on construction zones, are not detected  
by the system. The driver accepts  
responsibility.  
Caution  
Rear Vision Camera  
(RVC)  
Objects with a very small reflection  
cross-section, e.g. objects of narrow  
size or soft materials, may not be  
detected by the system.  
Parking assist systems do not detect  
objects outside the detection range,  
e.g. below the bumper or underneath  
the vehicle.  
During a reverse parking manoeuvre,  
the system does not consider a  
mounted coupling ball bar. The driver  
must consider this additional length.  
The system uses:  
rear view camera, mounted above the  
rear number plate  
ultrasonic parking sensors in the rear  
bumper  
The screen in the Information Display is  
divided into three parts:  
right side: there is a fixed menu and a  
representation of the vehicle  
Note  
It is possible that the sensor detects  
a non-existing object caused by echo  
disturbance from external acoustic noise  
or mechanical misalignments (sporadic  
false warnings may occur).  
middle part: part consists of a standard  
view  
The rear view camera assists the driver  
when reversing by displaying a view of  
the area behind the vehicle. It allows  
views of the vehicle's surroundings to be  
left side: there are the volume settings  
of the radio  
Make sure that the front number plate is  
properly mounted (not bent and no gaps  
130  
Advanced Driving Assistance Systems  
The parking sensors complete the  
information on the view from above the  
vehicle.  
The area displayed by the rear view  
camera is limited. Displayed images may  
be further or closer than they appear.  
2. The horizontal yellow line represents  
a distance of about 1 m beyond the  
edge of your vehicle's rear bumper.  
dazzling light, e.g. caused by the  
sun or artificial illumination is shining  
directly into the camera lens  
3. The horizontal green line represents  
a distance of about 2 m beyond the  
edge of your vehicle's rear bumper.  
weather limits visibility, such as fog,  
rain, or snow  
covered camera by snow, ice, slush,  
mud, dirt, or affected by windscreen  
damage or foreign items, e.g. stickers  
Activation  
The rear view camera is activated when  
the reverse gear is engaged.  
These distances may vary depending on  
the weight of the vehicle.  
clean the lense using the washer  
nozzle as described.  
Deactivation  
The rear view camera is deactivated  
when rear gear is disengaged.  
Standard view  
a plug is connected to the power outlet  
of the trailer hitch  
System limitations  
Warning  
vehicle had a rear end accident  
extreme temperature changes  
For optimal operation of the system,  
it is important to keep the lense of  
the camera, which is located in the  
bumper between the number plate  
lights, always clean.  
Rinse the lenses with water and wipe  
with a soft cloth.  
Do not clean the lenses with a steam-  
jet or high-pressure jet cleaner.  
Driver Drowsiness  
Detection (DDD)  
The driver drowsiness detection monitors  
the vigilance of the driver. Monitoring the  
vigilance of the driver is based on the  
changes in the driver's steering behavior.  
The system cannot replace the need for  
vigilance on the part of the driver. Taking  
a break is recommended as soon as  
feeling tired. Do not drive when feeling  
tired.  
The area behind the vehicle is displayed  
in the screen. The vertical lines represent  
the width of the vehicle with mirrors  
unfolded.  
The rear view camera may not operate  
properly when:  
the surrounding is dark  
1. The horizontal red line represents a  
distance of about 30 cm beyond the  
edge of your vehicle's rear bumper.