132
Advanced Driving Assistance Systems
Activation of the functionality
Setting speed by the driver
Deactivation of the functionality
Fault
In the event of a cruise control fault, the
speed is cleared resulting in flashing of
the dashes.
Press
, cruise control is in pause
mode and the symbol illuminates. The
vehicle is driven without cruise control.
Cruise control is deactivated, but not
switched off. The last memorized speed
remains in memory for later speed
resume.
Have the system checked by a
workshop.
Speed Limiter
Cruise control is deactivated
automatically when:
The speed limiter prevents the vehicle
from exceeding a preset maximum
speed. The maximum speed can be set
at speeds between 18 mph and 110 mph.
The driver can accelerate the vehicle up
to the preset speed. Deviations from the
limited speed may occur when driving
downhill. The preset speed can be
exceeded temporarily by pressing the
accelerator pedal firmly. The status and
preset speed limit are displayed on the
cluster.
● The brake pedal is depressed
● Vehicle speed is below 25 mph
● The Anti-Slip Regulator (ASR) system
or Electronic Stability Control is
operating
If the system is active, the preset speed
can be changed by pressing
to
● The selector lever is in N
increase or to decrease the speed. A
Resume Memorized speed
Press cruise control + or - or RESUME
button.
short press changes speed by 0.5 mph, a
long press changes speed by 3 mph.
The speed value is indicated on the
cluster.
Switching off the system
Exceeding the set speed
Press
: the cruise control mode
It is always possible to drive faster
than the set speed by depressing the
accelerator pedal. When the accelerator
pedal is released, the vehicle returns to
the memorized speed.
is deselected and the cruise control
indication extinguishes on the cluster.
Pressing
two times to activate the
speed limiter deactivates the cruise
control.
Switching off the ignition cancels any
memorized speed value.
English 
