Vehicle care
247
4. Insert bulb holder and turn
clockwise.
Fuse extractor
Electrical system
A fuse extractor may be located in the
fuse box in the engine compartment.
The extractor has two sides, each
side is designed for a different type of
fuses.
5. Insert left end of the lamp, slide to
Fuses
the left and insert right end.
Data on the replacement fuse must
match the data on the defective fuse.
Number plate light
There are two fuse boxes in the
vehicle:
The number plate light is designed as
LEDs and can not be changed. In
case of defective LEDs, have them
replaced by a workshop.
●
●
engine compartment
instrument panel
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire.
Interior lights
Have the following bulbs replaced by
a workshop:
●
●
●
courtesy light, reading lights
load compartment light
instrument panel illumination
Caution
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
English 