218  
					Service and maintenance  
					Dexos is the newest engine oil quality  
					that provides optimum protection for  
					gasoline and diesel engines. If it is  
					unavailable, engine oils of other listed  
					qualities have to be used.  
					Additional engine oil additives  
					The use of additional engine oil  
					additives could cause damage and  
					invalidate the warranty.  
					northern countries with very low  
					temperatures the factory filled coolant  
					provides frost protection down to  
					approx. -37 °C. This concentration  
					should be maintained all year round.  
					The use of additional coolant  
					additives that intend to give additional  
					corrosion protection or seal against  
					minor leaks can cause function  
					problems. Liability for consequences  
					resulting from the use of additional  
					coolant additives will be rejected.  
					Engine oil viscosity grades  
					Recommendations for gasoline  
					engines are also valid for  
					The SAE viscosity grade gives  
					information of the thickness of the oil.  
					Compressed Natural Gas (CNG),  
					Liquified Petroleum Gas (LPG) and  
					Ethanol (E85) fuelled engines.  
					Select the appropriate engine oil  
					based on its quality and on the  
					minimum ambient temperature  
					3 221.  
					Multigrade oil is indicated by two  
					figures, e.g. SAE 5W-30. The first  
					figure, followed by a W, indicates the  
					low temperature viscosity and the  
					second figure the high temperature  
					viscosity.  
					Washer fluid  
					Use only washer fluid approved for  
					the vehicle to prevent damage of  
					wiper blades, paintwork, plastic and  
					rubber parts. Consult a workshop.  
					Select the appropriate viscosity grade  
					depending on the minimum ambient  
					temperature 3 221.  
					All of the recommended viscosity  
					grades are suitable for high ambient  
					temperatures.  
					Topping up engine oil  
					Engine oils of different manufacturers  
					and brands can be mixed as long as  
					they comply with the required engine  
					oil quality and viscosity.  
					Brake and clutch fluid  
					Use of engine oil with only  
					Over time, brake fluid absorbs  
					moisture which will reduce braking  
					effectiveness. The brake fluid should  
					therefore be replaced at the specified  
					interval.  
					ACEA A1/B1 or only A5/B5 quality is  
					prohibited, since it can cause long-  
					term engine damage under certain  
					operating conditions.  
					Coolant and antifreeze  
					Use only organic acid type-long life  
					coolant (LLC) antifreeze approved for  
					the vehicle. Consult a workshop.  
					The system is factory filled with  
					coolant designed for excellent  
					corrosion protection and frost  
					protection down to approx. -28 °C. In  
					Select the appropriate engine oil  
					based on its quality and on the  
					minimum ambient temperature  
					3 221.