Vehicle care
189
3. Remove bulb from holder and
renew bulb.
Fuse extractor
A fuse extractor may be located in the
fuse box in the engine compartment.
Place the fuse extractor on the
various types of use from the top or
side, and withdraw fuse.
Electrical system
4. Insert bulb holder in bulb housing
Fuses
and rotate clockwise.
Data on the replacement fuse must
match the data on the defective fuse.
5. Insert bulb housing and secure
using a screwdriver.
In a box above the positive terminal of
the battery are some main fuses. If
necessary have them changed by a
workshop.
Before replacing a fuse, turn off the
respective switch and the ignition.
Engine compartment fuse
box
A blown fuse can be recognised by its
melted wire. Do not replace the fuse
until the cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Notice
Not all fuse box descriptions in this
manual may apply to your vehicle.
The fuse box is in the engine
compartment.
Disengage the cover, lift it upwards
and remove.
When inspecting the fuse box, refer
to the fuse box label.
English 
