Get Vehicle care -> Bulb replacement Guide for Vauxhall Vivaro Van Third Generation (2019-2026)

Vehicle care

243

Low beam

Bulb replacement

Before replacing a bulb, ensure that

all exterior and interior lights and the

ignition are switched off. All doors

have to be closed.

Only hold a new bulb at the base. Do

not touch the bulb glass with bare

hands.

Use only the same bulb type for

replacement.

Replace headlight bulbs from within

the engine compartment.

Low beam bulb sits in outer chamber

(2)

High beam bulb sits in inner chamber

(1)

Parking light bulb sits in inner

chamber (1)

Daytime running light bulb sits in

outer chamber (2)

1. Remove the protective cover.

Bulb check

After a bulb replacement switch on

the ignition, operate and check the

lights.

Halogen headlights

Front turn lights 3 248.

Illustrations show the right headlight

unit.

2. Press latch and remove the bulb

socket from reflector housing.

244

Vehicle care

Withdraw the bulb holder from the

reflector housing.

High beam

3. Detach the bulb from the bulb

socket and replace the bulb.

1. Remove the protective cover.

4. Insert the bulb socket into the

3. Detach the bulb from the bulb

socket and replace the bulb.

reflector housing.

5. Fit the cover.

4. Insert the bulb socket into the

reflector housing.

5. Fit the cover.

2. Press latch and remove the bulb

socket from reflector housing.

Vehicle care

245

2. Press the clips on the bulb socket

to disengage and withdraw socket

from the reflector.

Parking light

Daytime running light

1. Remove the protective cover.

3. Remove the bulb from the socket

by pulling.

4. Replace and insert the new bulb

into the socket.

5. Insert the bulb socket into the

housing.

246

Vehicle care

2. Press the clips on the bulb socket

to disengage and withdraw socket

from the reflector.

Low beam

Xenon headlights

Front turn lights 3 248.

9 Danger

Illustrations show the right headlight

unit.

Xenon headlights work under

extremely high electrical voltage.

Do not touch. Have bulbs replaced

by a workshop.

High beam

3. Remove the bulb from the socket

by pulling.

4. Replace and insert the new bulb

Low beam bulb sits in outer chamber

(2)

into the socket.

5. Insert the bulb socket into the

housing.

High beam bulb sits in inner chamber

(1)

Daytime running light with LEDs

1. Remove the protective cover.

The daytime running light unit in the

lower bumper area is designed with

LEDs. In case of defective LEDs,

have them replaced by a workshop.

Vehicle care

247

3. Detach the bulb from the bulb

socket and replace the bulb.

4. Insert the bulb socket into the

reflector housing.

5. Fit the cover.

Front fog lights

2. Press latch and remove the bulb

socket from reflector housing.

2. Turn the bulb socket

anticlockwise and remove it from

the light assembly.

Withdraw the bulb holder from the

reflector housing.

1. Unscrew and remove the

underfloor cover.

3. Disengage the plug connector by

pulling the retaining lug.

248

Vehicle care

4. Remove and replace the bulb unit

and attach the plug connector.

Note that the bulb and the socket

are one unit and have to be

changed together.

Turn light bulb sits in inner chamber

(1)

2. Rotate the bulb socket

anticlockwise to disengage and

withdraw from the reflector.

5. Insert the bulb socket into the light

assembly by turning clockwise

and engage.

6. Mount the light assembly by

tightening the two screws.

7. Attach and engage the cover.

Front turn lights

Illustrations show the right headlight

unit.

1. Remove the protective cover.

3. Slightly press down the bulb, turn

it anticlockwise and remove it

from the socket.

4. Replace and insert the new bulb

into socket by turning clockwise.

5. Insert the bulb socket into the

reflector and turn clockwise.

Vehicle care

249

Tail lights

Tail light assembly

All body styles except platform cab

2. Unscrew and remove the two

screws.

4. While holding the light assembly,

push the retaining lug which holds

the tail light assembly in the body.

1. Vehicles with a cover hiding the

lower tail light assembly screw:

remove cover by carefully

releasing its retaining lugs with a

screwdriver and tilting the cover

slightly towards the outside.

3. Vehicles with air vent or cover

behind the tail light, in the trim:

Remove air vent or cover.

250

Vehicle care

5. Carefully withdraw the tail light

assembly from recess and

12. Clip in cover which may have

covered the lower tail light

assembly screw.

remove. Take care that the cable

duct remains in position.

6. Detach the cable from the retainer

in the light assembly.

13. Attach cover or air vent behind the

tail light if removed before.

Platform Cab

8. Push the bulb slightly down, turn

it and remove it from the bulb

carrier. Replace the bulb:

Tail light / parking light (1)

Reverse light (2)

Brake light / parking light (3)

Turn light / hazard warning flasher

(4)

7. Disengage the central retaining

lug, pull the bulb carrier and

disengage the remaining retaining

lugs.

1. Remove the four screws from the

lens.

2. Remove lens from the aperture.

9. Attach the bulb carrier to the light

assembly.

10. Attach the cable to the retainer.

11. Attach the light assembly to the

vehicle body and tighten both

screws.

Vehicle care

251

Side turn lights

To replace the bulb, remove the light

housing:

3. Push bulb into socket slightly,

rotate anticlockwise, remove and

renew bulb.

2. Pull the retaining lug upwards and

remove the bulb socket from the

plug connector.

Turn light (1)

Brake light (2)

Tail light (3)

Reversing light (4)

Rear fog light, may be on one side

only (5)

3. Replace the complete unit.

1. Slide the lamp housing forward

and remove it at the back. It may

help to use a screwdriver to lever

out the light housing from the

body. Wrap the tip of the

4. Insert left end of the lamp, slide to

the left and insert right end.

Centre high-mounted brake

light

Vehicles with hinged doors or

tailgate

screwdriver with a cloth to prevent

paint damage.

4. Install lens in aperture and

replace the four screws.

1. Open the rear doors.

Vehicle care -> Bulb replacement for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals