Vehicle care
235
Putting back into operation
(electric vehicle)
When the vehicle is to be put back into
operation:
Vehicle checks
Performing work
9 Danger
The ignition system uses
extremely high voltage. Do not
touch.
●
Connect the clamp to the
negative terminal of the 12 V
vehicle battery. Initialise the
power windows 3 41.
●
●
●
●
Check tyre pressure.
Fill up the washer fluid reservoir.
Check the coolant level.
Fit the number plate if necessary.
9 Danger
End-of-life vehicle recovery
Electric or hybrid versions:
Information on end-of-life vehicle
recovery centres and the recycling of
end-of-life vehicles is available on our
website, where legally required. Only
entrust this work to an authorised
recycling centre.
Never try to perform maintenance
work on high voltage components
yourself. You may be injured and
the vehicle may be damaged.
Service and repair of these high
voltage components should only
be performed by a trained service
technician with proper knowledge
and tools. Exposure to high
9 Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start
operating even if the ignition is off.
voltage may cause shock, burns,
and even death. The high voltage
English 