Location of the boot closing button.
Press the close button on the inner right side of the boot hatch to close it. Press the button twice to activate a delayed close.
The delay is approximately 30 seconds.
You can also use the close button to adjust how far the boot opens. This is useful if you want the boot hatch to stay within easy
reach or if you are somewhere with a low ceiling, such as a garage.
Locking with the boot open
Locking the car with the boot open will lock all doors and set the alarm only for the closed doors. If you then close the boot
hatch, it will lock and the alarm will be set for the boot.
6.2.3.1. Adjusting boot opening height
You can adjust how much the boot hatch opens.
If the car is often in places with a low ceiling, such as a garage, you may want to reduce the boot opening height. To have more
room to access the boot, you can raise the boot opening height.
Once adjusted, the boot hatch will continue to open to the newly set height until changed.
Open the boot hatch.
1
Adjust the boot hatch to the desired height using the close button on the inner right side of the boot hatch.
2
Use the close button marked with the associated symbol.
To lower the boot hatch, move it manually to the preferred height, then press the close button to stop it. If you do not
press the close button, the hatch will continue to lower until it closes.
To raise the boot hatch, move it manually to the preferred height.
Press and hold the close button for a few seconds to set the new height.
3
A chime sound confirms that the new height is set.
>
A height adjustment is saved to the profile being used at that time.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
150 / 396
English 
