2025-2026 Volvo EX30 4 Door Entry and security -> Opening the bonnet User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Entry and security -> Opening the bonnet for Your Volvo EX30 4 Door First Generation (2025-2026)

Open doors are highlighted in red on the car symbol in the display. The car will also use warning sounds to indicate improperly  
closed doors.  
6.2.1. Opening the bonnet  
Opening the bonnet provides access to the front storage compartment. Be sure to close the bonnet again  
before driving the car.  
Location of release lever  
The interior lever as seen from the driver's seat.  
The lever to open the bonnet can be found below the dashboard on the driver's side, just in front of the door hinge.  
Opening the bonnet  
Pull the bonnet lever upwards twice.  
1
The bonnet releases from its fully locked position.  
>
Lift the bonnet by its front edge and open it to its fully extended height, which is just above a 45-degree angle.  
2
The bonnet stays in position.  
>
Warning  
Do not drive with the bonnet open  
Stop the car immediately if there is any indication that the bonnet is not completely closed.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
147 / 396  
Note  
Open bonnet warning  
If you see an open bonnet warning in the driver display, open the bonnet and check for obstructions before closing it  
again. Contact Volvo support if the notification doesn't go away.  
6.2.2. Closing the bonnet  
Take extra care to ensure that the bonnet completely closes after being open.  
Make sure nothing gets in the way of the bonnet as it closes.  
Warning  
Pinching and crushing hazard  
Keep all hands away from the bonnet's closing path. Take extra caution when children or pets are nearby.  
From the fully opened position, simply pull the bonnet down by holding the outer edge.  
1
Carefully lower the bonnet until it reaches the locking mechanism.  
2
3
Press down with both hands on the front edge of the bonnet lid. Make sure the bonnet fits into the locks at the same  
time. Keep the front edge flat as it closes.  
The bonnet noticeably locks in place on both sides.  
>
Make sure there are no significant gaps or any indication that the bonnet is not completely closed.  
4
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
148 / 396  

Related Topics

Popular Owner Manuals