Once the alarm is triggered, the following happens:
The alarm warning lights flash for up to 5 minutes.
The alarm sound starts.
The alarm cycle restarts several times over if whatever triggered the alarm isn't resolved.
Tip
Alarm sensitivity
You can turn reduced alarm sensitivity on in settings, which is especially useful if the car is parked on a ferry where it can
be affected by external motion or vibrations.
The alarm may also be triggered if you use a carjack, connect a trailer or have the car towed. In such cases, you should al-
ways activate reduced alarm sensitivity.
Stopping the alarm
Unlocking the car while the alarm is triggered will stop any alarm sounds and warning lights.
Important
Do not make any changes or additions to the alarm system, or it may not work properly.
6.4.1.1. Reducing the alarm sensitivity
Reduce the alarm sensitivity when you expect significant movement in or around the car when parked.
This setting is especially useful if the car is parked where it can be affected by external motion, such as when travelling on a
ferry.
Note
While the reduced alarm sensitivity setting is active:
the car won't double lock
you can't install software updates.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Controls → Locking → Reduced alarm mode.
2
3
Turn reduced alarm sensitivity on or off.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
157 / 396
English 
