DRIVER SUPPORT
1. Move the gear selector to the gear instruc-
ted by the system. Wait until the steering
wheel turns and then drive slowly forward.
vehicle, the auto-brake function will bring the
vehicle to a standstill.
Positioning the vehicle in the parking space
A pop-up message will then appear in the
instrument panel and the driver can tap
Cancel to cancel the parking sequence or
Resume to continue the parking sequence.
2. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
3. Engage reverse gear and back up slowly.
After selecting Resume:
4. Be prepared to apply the brakes when
instructed to do so by a graphic and mes-
sage in the center display.
–
Check that the area around the vehicle is
free of obstructions and follow the instruc-
tions on the center display, such as:
The function will switch off automatically and
a graphic and message will appear to indicate
that parking has been completed. Adjust-
ments can always be made be the driver after-
ward. Only the driver can determine when the
vehicle is correctly parked.
To continue – Gently accelerate away
from object.
Parallel parking positioning overview.
Related information
Park Assist Pilot* (p. 371)
•
Park Assist Pilot* limitations (p. 376)
•
CAUTION
The warning distance is shorter when the
sensors are used by Park Assist Pilot
(PAP102) compared to when they are used
by the Parking Assist system.
Auto-brake during a parking sequence
If, while parking, the parking sensors detect a
vehicle or pedestrian in the vehicle's intended
direction of travel behind or in front of the
Perpendicular parking positioning overview.
102
Park Assist Pilot
* Option/accessory. 375
English 
