Power closing the trunk lid
1. Press the button in the trunk lid when it is open fig. 51.
Or: pull the
button in the driver door upward when the ignition is switched on until the trunk lid is closed.
Or: On vehicles with Keyless Access with push-button start: briefly press and hold the
button on the vehicle key. Th
vehicle key must be nearby to use this feature.
Or: Begin closing the trunk lid by hand until it closes by itself.
The trunk lid is closed.
Interrupting the opening or closing process
1. Press the
or
button while the lid is opening or closing.
Or: press the button on the trunk lid while the lid is opening or closing fig. 51.
The trunk lid can now be moved by hand. It is necessary to use more force when doing this.
Pressing the
Chimes
button again moves the trunk lid back to the original position.
When the trunk lid is opened or closed from inside the vehicle or using the vehicle key, chimes will sound.
Changing and saving the opening angle
If the space behind or above the vehicle is not large enough to allow the trunk lid to open completely, you can change how far
the trunk lid opens.
1. Interrupt the opening process at the desired open position. It must be at least half open.
2. Press and hold the
button in the trunk lid until the emergency flashers start flashing fig. 51.
The adjusted opening angle is saved.
There will be an audible signal and the emergency flashers will flash to indicate that the setting was saved.
WARNING
Closing the trunk lid incorrectly or carelessly may lead to serious injuries.
When closing the trunk lid, make sure your hands are not within the closing range of the lid.
NOTICE
If you open or close the trunk lid when there is not enough space, this may cause damage.
Before opening or closing the trunk lid, check whether there is enough room, e.g. in garages.
Trunk lid with Easy Open motion sensor
Please read the introductory information and heed the Warnings and Notice ⇒
and Introduction.
104
English 