Version 1
—Start the engine.
—Depress and hold the brake pedal.
—Activate parking assistant (→ Driving into a parking space).
—Press the turn signal lever for the side of the street where the parking space is that you want to get out of.
—Touch the
function button on the Infotainment system screen.
—Observe the text messages on the instrument cluster display.
—Observe the display of the parking procedure in the display of the instrument cluster.
Version 2
—Start the engine.
—Depress and hold the brake pedal.
—Activate parking assistant (→ Driving into a parking space).
—Press the turn signal lever for the side of the street where the parking space is that you want to get out of.
—Engage selector lever position .
—Observe the text messages on the instrument cluster display.
—Observe the display of the parking procedure in the display of the instrument cluster.
Brake when an acoustic signal sounds, the display lights up, or when the request to drive forwards appears on the
instrument cluster display.
Continue the procedure for driving out of the parking space until a text message on the instrument cluster display
and possibly an acoustic signal indicate that the procedure has been completed.
WARNING
Drive the vehicle out of the parking space only when permitted by the traffic situation.
The lane that is displayed in the Infotainment system during a parking process is a schematic representation.
It does not correspond to the actual parking procedure performed by the park assist.
Troubleshooting
The system behaves differently than expected
This could have various causes:
—The sensors are dirty(→ Vehicle care, exterior). The sensor visibility may be impaired by dirt and snow or also
residue from cleaning agents or coatings.
—The system requirements must be met (→ Park Assist).
—The sensors are covered by water.
—The vehicle is damaged in the area of the sensors, e.g. caused by parking collisions.
—The detection ranges of the sensors are blocked by add-on parts, e.g. bicycle carriers.
—Changes have been made to the paintwork in the area of the sensors or structural modifications have been made,
e.g. on the vehicle front end or the running gear.
—The ultrasound signal is subject to interference from external noise sources, e.g. rough tarmac surface or
cobblestones.
264
English 
