Fitting the net partition behind the front seats
The net partition can only be installed behind the front seats when the second row of seats is folded down→
.
Fig. 1 Behind the folded-down second row of seats: Fitted
net partition.
Installing the net partition behind the folded second row of seats
—Fold down the second seat row (→ Second row of seats).
A
—Hook the net partition into thefront left holder in the roof→ Fig. 1
over the upper position so that it latches securely in the slots.
—Hook the net partition into thefront right holder in the roof.
. Ensure that the transverse rod is pulled up
B
—Hook the net partition into the seat anchor points→ Fig. 1
.
Removing the net partition
—Loosen the net partition straps.
—Unhook the retaining hooks of the net partition from the fastening rings or the seat anchor points.
—Unhook the net partition from the left holder in the roof.
—Unhook the net partition from the right holder in the roof.
WARNING
In the event of a sudden driving or braking manoeuvre or accident, loose objects could be flung though the vehicle
and cause severe injuries.
● Ensure that the rods are securely engaged.
● Objects should be secured even when the net partition is correctly fitted.
● While the vehicle is moving, no passengers may travel behind the fitted net partition.
NOTICE
The belts of the net partition could become caught or damaged if you move the front seat far to the rear.
● Make sure the belts on the net partition are routed to the sides of the seat when you move the front seats
forwards or back.
343
English 