—Lift the left-hand side of the luggage compartment cover and remove it from the luggage compartment.
Fitting the luggage compartment cover
—Fit the luggage compartment cover diagonally into the luggage compartment.
—Swivel the left-hand side of the luggage compartment cover up and set it down on the retainer.
—Swivel the right-hand side of the luggage compartment cover down and set it down on the retainer.
—Push the luggage compartment cover until it has clicked into place in the large retainers→ Fig. 1.
Always ensure that the belt is routed correctly when fitting the luggage compartment cover. The belt must not be
trapped by the luggage compartment cover.
Setting up the luggage compartment cover
The luggage compartment cover can be raised to ease the loading or unloading, if necessary.
—Move the luggage compartment cover up.
—Engage the luggage compartment cover in the two smaller retainers→ Fig. 1.
WARNING
Objects that are not secured or are secured incorrectly, or animals positioned on the luggage compartment cover,
can damage it and may also cause serious injuries in the event of a sudden driving or braking manoeuvre and in an
accident.
● Never transport any objects on the luggage compartment cover.
● Never transport animals on the luggage compartment cover.
WARNING
Using seat belts incorrectly increases the risk of severe or fatal injuries.
● Do not allow the belt webbing to become jammed, damaged or to rub on any sharp edges.
NOTICE
To prevent damage to the luggage compartment cover, do not load the luggage compartment to such a height that
the load will press against the luggage compartment cover when the boot lid is closed.
The luggage compartment should be empty to ease removal and installation of the luggage compartment
cover.
Roll-up luggage compartment cover
340
English 
