Cable and wireless connections
Introduction to the topic
Some external devices can be connected to the Infotainment system by cable and wireless
connections present in the vehicle (if installed).
The type and number of cable and wireless connections differ according to country and vehicle.
The connections may also be different within a model series or in special-edition models.
In the case of cable connections, use only the original device connecting cables or, if available,
the factory-supplied connecting cables for your vehicle.
If the plug on the connecting cable cannot be inserted, check the angle of insertion and the
connections.
NOTICE
Use only suitable and undamaged connecting cables for cable connections.
●
When inserting the plugs of the connecting cables into the appropriate connection, ensure
that they are correctly positioned and apply only light pressure. Applying too much pressure
may damage both the unit connection and the plug of the connecting cable.
●
●
Make sure that the connecting cable is not pinched or sharply bent.
Using unsuitable or damaged connecting cables may damage devices and cause
malfunctions.
If a connected device is not recognised, disconnect all devices and connect the device
again. If necessary, check that the connecting cable you are using is working properly.
If a connected device malfunctions, restart the device. In some cases this will remedy the
fault.
English 