Parking system displays
The range of possible settings varies according to the country, the device and the vehicle's
equipment specification.
With some equipment levels, the vehicle approaching an obstacle is displayed in several segments
on the Infotainment system and this is backed up by acoustic signals. The display may vary
depending on the situation.
The collision area has been reached when the penultimate segment is displayed, if not before. Do
not continue driving!
All equipment and displays are described without indicating whether the equipment is optional or
specific to the model type. The systems available depend on the equipment in the vehicle.
General settings
Red-coloured image element: close obstacle.
The vehicle is at risk. Brake.
Red line: boundary lines.
Yellow-coloured image element: obstacle in
the vehicle path. The vehicle is at risk. Adjust
the steering angle.
Green lateral line: extension of the vehicle.
White-coloured image element: obstacle
outside the path of the vehicle.
System fault in the monitored area (with some
equipment levels) (→ Parking systems, FAQ).
The colour may vary.
Mute audio signals.
Adjust brightness, contrast and colour.
Show display.
Hide display.
Exit current display and end function.
The following also applies to vehicles with rear view camera system
Switch to rear view camera system (depending on vehicle equipment).
Switch to Park Distance Control (→ Park Distance Control, Operation).
Signal tones
An intermittent signal tone is given if a sufficiently short distance between the vehicle and an
obstacle is detected. The shorter the distance, the shorter the intervals. The signal tone will sound
continuously if the obstacle is very close. Do not continue driving!
NOTICE
Visual and acoustic warnings are given only for obstacles in the vehicle path.
English 
