Maintenance and Breakdown -> Cleaning and changing wiper blades for Your Volkswagen ID.5 SUV First Generation (2021-2025)

Activating the service position via the exit menu  
The service position of the wiper blades can also be activated for a limited period in the exit menu. The ignition must be switched off  
for this.  
Lifting the windscreen wiper arms  
1. Move the wiper arms to the service position before lifting →  
.
2. Hold and lift the wiper arms only in the area of the wiper blade mounting.  
Placing the wiper arms on the windscreen  
1. Before starting your journey, take hold of the wiper arms carefully and only in the area of the wiper blade mounting and place  
them on the windscreen.  
2. To move the wiper arms back to their starting position, operate the “flick wipe” function with the ignition switched on  
(→ Wipers).  
The wiper arms move back to their initial position.  
NOTICE  
If due care is not taken when working on the wiper arms, this can result in damage to the bonnet, windscreen or wiper arms.  
Lift the wiper arms carefully and always only when in service position.  
Never open the bonnet when the wiper arms have been lifted.  
Always place the wiper arms carefully back on the windscreen before starting a journey.  
The factory-fitted windscreen wiper blades are coated with graphite. The graphite coating ensures that the wiper blade moves quietly  
over the window. If the graphite coating is damaged, the wiper will become louder.  
Check the condition of the wiper blades on a regular basis.  
Wiper blades that judder should be changed if damaged or cleaned if dirty →  
.
Damaged wiper blades should be replaced immediately. Wiper blades are available from a suitably qualified workshop. Volkswagen  
recommends using an authorised Volkswagen repairer.  
Cleaning wiper blades  
1. Move the wiper arms to the service position (→ Wiper blades).  
2. Lift the wiper arms, holding hold them only in the area of the wiper blade mounting.  
3. Clean the wiper blades carefully using a damp sponge →  
.
4. Place the wiper arms carefully back onto the windscreen.  
Changing the windscreen wiper blades  
Changing the windscreen wiper blades.  
1
Release button for the wiper blade.  
1. Move the wiper arms to the service position before lifting (→ Wiper blades).  
2. Lift the wiper arms, holding hold them only in the area of the wiper blade mounting.  
3. Press and hold the release button → Fig. 1 1 .  
4. Tilt the wiper blade in the direction of the wiper arm → Fig. 1 A and pull it off in the direction of the arrow B at the same  
time. You may need to use some force to do this.  
5. Insert a new wiper blade with the same length and design onto the wiper arm against the direction of the arrow. Push it on until  
it engages → Fig. 1 B . The wiper blade must be in folded-down position to do this → Fig. 1 A .  
6. Place the wiper arms carefully back onto the windscreen.  
WARNING  
Worn or dirty windscreen wiper blades reduce visibility and increase the risk of accidents and severe injuries.  
Always clean dirty wiper blades.  
Always change the wiper blades if they are damaged or worn and no longer clean the windscreen properly.  
NOTICE  
Cleaning the wiper blades or windows with unsuitable cleaning agents can cause damage.  
Do not use fuel, nail varnish remover, paint thinner or similar liquids to clean the wiper blades and windows.  
Do not clean the wiper blades with hard sponges and other sharp objects.  
If wax residue from car washes and other care products remains on the vehicle windows, this can cause the wipers to rub.  
Remove wax residue using a special cleaning product or cleaning cloths.  
Before changing a bulb, check whether a bulb or LED light unit has failed. You can normally change bulbs yourself. If the exterior  
lighting uses LED technology, depending on model and vehicle equipment, it is not possible for you to change the LED light units or  
individual LEDs yourself. If individual LEDs fail, this may be an indication that other LEDs are on the point of failure too. In this case,  
have the LED light units checked and renewed if necessary at a suitably qualified workshop. Volkswagen recommends using an  
authorised Volkswagen repairer.  
It may be illegal to drive with faulty exterior lights.  
Additional bulb specifications  
Some bulbs might have factory specifications that differ from standard bulbs. The designation is inscribed on the bulb, either on the  
glass part or on the base.  
WARNING