Handle on the driver door: levering off the cover.
Locking the driver door manually.
1. Lever off the cap with the vehicle key in the direction of the arrow → Fig. 1.
2. Insert the key bit into the lock cylinder. The grip of the manual key points towards the rear door.
3. To lock the vehicle, turn the manual key in the direction of the arrow → Fig. 2.
4. To unlock the vehicle, turn the manual key in the opposite direction to the arrow → Fig. 2.
5. To open the door, pull the driver door handle forcefully.
The driver’s door handle folds outwards.
6. Fit the cap again.
Things to note when unlocking manually
When manual locking takes place, all doors are locked. With manual unlocking, only the driver door is unlocked. Observe the
information about the anti-theft alarm (→ Anti-theft alarm).
—The alarm is triggered when the driver door is opened (→ Anti-theft alarm).
—An emergency start must be performed after unlocking (→ Starting the engine).
—Activate the vehicle’s drive system to switch off the alarm.
The electronic immobiliser recognises a valid vehicle key.
The anti-theft alarm is activated when the vehicle is locked manually using the key bit (→ Anti-theft alarm).
English 
