4. Hook one of the retaining hooks of the upper transverse rod into one of the mounts in the roof → Fig. 1 1 .
5. Press both ends of the upper transverse rod together slightly and hook the second retaining hook into the opposite mount in the
roof.
6. Let go of the transverse rod and check that both retaining hooks of the net partition are correctly engaged.
7. Hook the bottom retaining hooks into the fastening rings at the front of the luggage compartment → Fig. 1 2 .
Tensioning the net partition
1. Pull the ends of the securing straps towards the rear until the net partition is securely tensioned → Fig. 1 3 , →
.
2. Check the tension of the net partition again if the seat position of the backrests in front of the net partition has been changed.
Removing the net partition
1. Undo the securing straps of the net partition → Fig. 1 3 by lifting the strap buckles → Fig. 1 4 .
2. Unhook the bottom retaining hooks from the fastening rings at the front of the luggage compartment → Fig. 1 2 .
3. Press both ends of the top transverse rod together and hold until the net partition has been removed.
4. Pull the net partition to the rear slightly and then carefully remove from the mounts in the roof by pulling downwards → Fig. 1
1 .
5. Press the release button on the transverse rod joint and fold up the net partition.
6. Roll up the net partition and stow in the bag.
WARNING
In the event of a sudden braking manoeuvre or accident, objects could be flung through the interior of the vehicle and lead to severe
or fatal injuries.
● Check that the net partition is not damaged.
● Never use a damaged net partition.
● Adjust all backrests in front of the net partition so that they are upright and engaged in position.
● Always check after installation to make sure that the retaining hooks of the net partition are correctly engaged.
● Check to make sure that the net partition is tensioned at regular intervals.
● Additionally secure all objects in the luggage compartment even when the net partition is installed.
● Make sure that there are no persons behind the fitted net partition when the vehicle is in motion.
NOTICE
If the net partition is not secured at the mounting points provided for this purpose, this may result in damage.
● Always secure the net partition only to the designated mounting points.
The net partition can help to prevent loose objects from being flung from the luggage compartment into the passenger compartment,
for example in the event of a braking manoeuvre.
The net partition can optionally be installed behind the rear bench seat (→ Net partition behind the rear bench seat) or behind the
front seats → Fig. 1.
Installing the net partition
English 
