3
Lower guides at the side of the luggage compartment.
The second luggage compartment floor can be fitted in upper and lower positions:
1. Lift the luggage compartment floor by the handle → Fig. 2 1 and pull it out of the guides on the sides of the luggage
compartment in the direction of the arrow.
2. Insert the luggage compartment floor into the guides at the required height → Fig. 2 2 or 3 and push it forwards as far as it
will go.
NOTICE
Incorrect use can damage the second luggage compartment floor or the trim of the luggage compartment.
● Do not allow the second luggage compartment floor to fall when closing it, but always guide it downwards carefully.
● Always distribute loads (maximum 50 kg (110 lbs)) over as wide an area as possible on the luggage compartment floor in order to
avoid point loads.
● Transport heavy loads only when the luggage compartment floor is in the lower position.
Volkswagen recommends that you secure items to the fastening rings with the aid of fixing or securing straps.
A fitted net partition can help to prevent objects from being flung from the luggage compartment into the passenger compartment,
e.g. in the event of a braking manoeuvre.
The net partition can be optionally installed behind the rear bench seat → Fig. 1 or behind the front seats (→ Net partition behind the
front seats).
Installing the net partition
In the luggage compartment: net partition installed behind
the rear bench seat.
1
2
3
4
Mountings in the roof.
Fastening rings at front of luggage compartment.
Securing straps.
Strap buckles.
1. Take the net partition out of the bag, unroll and fold open. The net partition hinge must audibly engage.
2. Adjust the front seats to an upright and engaged position.
3. Adjust the backrests in the second row of seats to an upright position and engage as close as possible to the net partition.
English 
