Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-Speed Manual Transmission 02Q - Edition 05.2013
15
Shift Forks, Servicing
Special tools and workshop equipment required
♦ Press Plate - VW402-
♦ Press Piece - Rod - VW411-
♦ Press Piece - Multiple Use - VW426-
♦ Press Piece - Multiple Use - VW431-
♦ Puller - Kukko Internal - 18.5-23.5mm - 21/3-
♦ Puller - Kukko Counterstay - 22/1-
1 - Rubber Damper
❑ Can be removed and in‐
stalled by hand
2 - Gearshift Rod with 1st Gear
and 2nd Gear Shift Fork
3 - Gearshift Rod with 3rd Gear
and 4th Gear Shift Fork
4 - Gearshift Rod with 5th Gear
and 6th Gear Shift Fork
❑ On some transmission,
is also for the reverse
gear shift fork bearing
5 - Reverse Gear Shift Fork
❑ On the axle for the re‐
verse gear shift fork. Re‐
fer to
⇒ Fig. ““The Reverse
Gear Shift Fork -1- is
Mounted on the
Axle -2- behind the 5th
and 6th Gear Shift
Rod -3-.”“ , page 254
❑ From transmission
manufacture date
3/6/06, ball sleeve
-item 6-
⇒ Item 6 (page 277) has
been omitted
❑ Sliding omission
❑ Reverse gear shift fork
is adapted
❑ If the axle for the reverse
gear shift fork is deleted,
bearing on the shift rod
for the 5th and 6th gear
shift fork. Refer to
⇒ Fig. ““The Reverse Gear Shift Fork -1- is Mounted on the Gearshift Rod with the 5th and 6th Gear Shift
Fork -2-.”“ , page 254
❑ Reverse gear shift fork differentiation. Refer to
⇒ Fig. ““Reverse Gear Shift Fork Differentiation”“ , page 278
❑ Refer to the Parts Catalog.
6 - Ball Sleeve
❑ Removing. Refer to
⇒ Fig. ““Through Transmission Manufacture Date 3/5/06 - Remove Reverse Gear Shift Fork Ball
Sleeve”“ , page 278 .
15. Shift Forks, Servicing
277
English 
