Safety belts -> Adjusting the safety belt position to body size for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Adjusting the safety belt position to body size  
The belt positioning can be adjusted with the following equipment:  
Belt height adjusters for the front seats Safety belt height adjuster.  
Height-adjustable front seats Seating position.  
WARNING  
Incorrect safety belt positioning can cause serious injuries in the event of an accident or during sudden braking or driving  
maneuvers.  
Ensure your safety belt is positioned correctly.  
Place the backrest in an upright position and position your safety belt correctly for your size to maximize the  
protective function of the safety belt.  
Place the shoulder portion of the safety belt over the center of your shoulder, and never under your arm or across  
your neck.  
Lay the safety belt flat and securely on the upper part of the body and pelvis. Retighten the belt if necessary.  
Ensure the lap section of the safety belt lies across your lap and never over your stomach.  
Throughout your pregnancy, ensure the safety belt rests evenly across your chest and as low and flat as possible  
on your lap. This will prevent pressure being applied to your lower abdomen.  
Do not twist the safety belt while wearing it.  
Never hold the safety belt away from the body with your hand.  
Do not guide the safety belt over hard or breakable objects, such as eyeglasses, pens, or keys.  
Do not modify how the safety belt is routed using belt clips, retaining loops, or similar objects.  
Persons who cannot achieve the optimum belt routing due to physical conditions should contact an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility about possible special modifications that can be used to  
achieve the best possible protection with the safety belt and airbags. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Safety belt height adjuster  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
57  
Fig. 28 Next to the front seats: safety belt height adjuster.  
You can use the safety belt height adjuster to adjust the safety belt routing in the shoulder area according to your individual  
body size, so that the safety belt can be correctly fastened:  
1. Push down and hold the safety belt height adjustment button in the direction of the arrows fig. 28.  
2. Slide the safety belt height adjuster upward or downward until the safety belt lies over the center of the shoulder Safe  
belt positioning.  
3. Release the safety belt height adjustment button.  
4. Pull hard on the safety belt to check that the safety belt height adjuster is engaged.  
WARNING  
Changing the safety belt height while driving may cause serious or fatal injuries.  
Never adjust the safety belt height while driving.  
Automatic safety belt retractor, safety belt pretensioner, safety belt load limiter  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The vehicle seat belts are part of the vehicle safety concept Airbag system. The vehicle safety concept has the following  
key functions:  
Automatic safety belt retractor  
Every safety belt is equipped with an automatic safety belt retractor on the shoulder belt section. If the safety belt is pulled  
slowly or while driving normally, the shoulder belt will be able to move freely. The automatic safety belt retractor blocks the  
safety belt from moving if the safety belt is pulled out quickly, for example during sudden braking maneuvers, when driving on  
hills, when driving around curves and when accelerating.  
Safety belt pretensioners  
58