Safety belts -> Automatic safety belt retractor, safety belt pretensioner, safety belt load limiter for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Fig. 28 Next to the front seats: safety belt height adjuster.  
You can use the safety belt height adjuster to adjust the safety belt routing in the shoulder area according to your individual  
body size, so that the safety belt can be correctly fastened:  
1. Push down and hold the safety belt height adjustment button in the direction of the arrows fig. 28.  
2. Slide the safety belt height adjuster upward or downward until the safety belt lies over the center of the shoulder Safe  
belt positioning.  
3. Release the safety belt height adjustment button.  
4. Pull hard on the safety belt to check that the safety belt height adjuster is engaged.  
WARNING  
Changing the safety belt height while driving may cause serious or fatal injuries.  
Never adjust the safety belt height while driving.  
Automatic safety belt retractor, safety belt pretensioner, safety belt load limiter  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
The vehicle seat belts are part of the vehicle safety concept Airbag system. The vehicle safety concept has the following  
key functions:  
Automatic safety belt retractor  
Every safety belt is equipped with an automatic safety belt retractor on the shoulder belt section. If the safety belt is pulled  
slowly or while driving normally, the shoulder belt will be able to move freely. The automatic safety belt retractor blocks the  
safety belt from moving if the safety belt is pulled out quickly, for example during sudden braking maneuvers, when driving on  
hills, when driving around curves and when accelerating.  
Safety belt pretensioners  
58  
The safety belts for the driver and front seat passenger are equipped with safety belt pretensioners.  
Safety belt pretensioners are activated by sensors and tighten the safety belts in the event of severe front-on, side and rear  
collisions or if the vehicle rolls over. If the safety belt is loose, it retracts. This can reduce the forward movement of the vehicle  
occupants and movement of the vehicle occupants in the direction of the collision. The safety belt pretensioner works togethe  
with the airbag system. The safety belt pretensioner is only activated during a rollover accident if the Side Curtain Protection®  
airbags are deployed.  
Fine dust may appear if airbags deploy. This is completely normal and does not indicate a fire in the vehicle.  
WARNING  
The safety belt pretensioners only provide protection for one deployment. If the safety belt pretensioners deploy, the  
system must be replaced.  
Have deployed safety belt pretensioners and affected system components replaced immediately with new parts  
that are approved by Volkswagen for the vehicle.  
Only have suitably qualified professionals make repairs or modifications to a vehicle. Authorized Volkswagen  
dealers and authorized Volkswagen Service Facilities have the required tools, diagnostic devices, repair  
information, and qualified personnel. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
Never install safety belt pretensioner components removed from scrap vehicles or from recycling.  
Never modify any components of the safety belt pretensioners.  
Safety belt load limiter  
Safety belt load limiters reduce the force placed on the body by the safety belts during a collision.  
When disposing of the vehicle or of individual system components, all safety precautions must be observed. An authorized  
Volkswagen dealer or authorized Volkswagen Service Facility will be familiar with these provisions Safety belt  
pretensioner servicing and disposal. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility.  
Safety belt pretensioner servicing and disposal  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
When working on safety belt pretensioners, as well as when removing and installing other vehicle components as part of  
repair work, the safety belts can become damaged without you noticing. This may cause the safety belt pretensioner to not  
work correctly or prevent it from working in the event of an accident.  
The instructions must be followed so that the effectiveness of the safety belt pretensioner is not impaired and removed  
components do not cause injuries and environmental pollution. An authorized Volkswagen dealer or authorized Volkswagen  
Service Facility will be familiar with these provisions. Volkswagen recommends contacting an authorized Volkswagen dealer  
or authorized Volkswagen Service Facility.  
WARNING  
Repairs that you perform yourself or that are performed incorrectly on the safety belts, automatic safety belt retractors,  
and safety belt pretensioners can increase the risk of severe or fatal injuries. The safety belt pretensioner may not deploy  
when it should, or it may deploy unexpectedly.  
Never perform repairs, adjustments, or removal and installation of components of the safety belt pretensioners or  
safety belts yourself. Only have these procedures performed by suitably qualified professionals Accessories,  
replacement parts, repairs, and modifications. Volkswagen recommends contacting an authorized Volkswagen  
dealer or authorized Volkswagen Service Facility.  
59