Safety belts -> Fastening and unfastening the safety belts for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

buckle.  
Do not pinch or damage the safety belt and/or belt buckle, for example closing it in a door.  
Never remove, modify, or repair the safety belt and belt fastening elements.  
Always fasten the safety belt correctly before you begin driving and keep it fastened while driving.  
Twisted safety belt  
If the safety belt is difficult to pull out of the belt guide, the safety belt may have been pulled out too quickly when positioning  
the belt and may have become twisted within the side trim panel:  
1. Slowly and carefully pull the safety belt out completely by the belt buckle.  
2. Untwist the safety belt and guide the safety belt back slowly by hand.  
If you cannot untwist the safety belt, fasten the safety belt anyway. The twist must not be in a belt area that lies directly agains  
the body. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility immediately to have the twist  
rectified. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Lockable safety belt  
The safety belts on the rear seats and the safety belt on the front passenger seat are lockable and have an emergency lockin  
function. With the locking function, you can adjust the safety belt so that a child restraint is properly installed Securing a  
child restraint with a safety belt.  
Safety belts may only be locked for certain child restraint systems Child restraints – overview.  
An activated locking mechanism must be released when a vehicle occupant fastens their safety belt. To release the lock, push  
the red button in the belt buckle and guide the seat belt back fully by hand.  
WARNING  
Incorrect handling of the safety belts increases the risk of severe or fatal injuries.  
Check the safety belts and associated components regularly to ensure they function correctly.  
Never attempt to repair safety belts. Have damaged safety belts replaced.  
Always keep the safety belts clean.  
Never damage the safety belts by trapping them or chafing them on sharp edges.  
Always keep the belt buckle and insertion guide for the belt buckle free of foreign objects and fluids.  
Fastening and unfastening the safety belts  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
Safety belts that are fastened correctly hold vehicle occupants in the correct position during braking maneuvers or in a  
collision, in order to provide the maximum protection ⇒  
.
Fastening the safety belt  
53  
Fig. 24 Inserting the buckle tongue into the safety belt buckle (general example).  
Always fasten the safety belts before driving.  
1. Adjust the front seat and head restraint correctly Seating position.  
2. Have the rear seat backrest locked into place in an upright position ⇒  
.
3. Grab the belt and pull it evenly over the chest and pelvis. Do not twist the belt while doing this  
.
4. Insert the buckle tongue securely in the safety belt buckle for that seat fig. 24.  
5. Pull on the safety belt to make sure the buckle tongue is latched correctly in the safety belt buckle.  
Unfastening the safety belt  
54  
Fig. 25 Releasing the buckle tongue from the safety belt buckle (general example).  
Only unfasten the safety belt while the vehicle is stationary ⇒  
1. Press the red button in the safety belt buckle fig. 25.  
The buckle tongue will pop out.  
.
2. Guide the belt back by hand so that the belt rolls up easily, the belt does not twist, and the trim panel is not damaged.  
WARNING  
Incorrect safety belt positioning or unfastening the safety belt while the vehicle is in motion can lead to serious or fatal  
injuries in the event of an accident or braking maneuver.  
Place the backrest in an upright position and position your safety belt correctly for your size to maximize the  
protective function of the safety belt.  
Never unfasten the safety belt while the vehicle is in motion.  
Safety belt positioning  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Safety belts only offer the optimum protection during a collision and reduce the risk of serious injury or death if they are  
fastened and positioned correctly. The correct safety belt position also holds the vehicle occupant in place so that the airbags  
can provide their maximum protection if they deploy. Therefore, all vehicle occupants should always fasten their own safety  
belts and make sure they are positioned correctly fig. 26.  
An incorrect seating position can cause severe or fatal injuries Seating position.  
Correct safety belt positioning  
55