Advertisement

Advertisement

Driving -> Driving tips for Your Volkswagen T-Roc SUV First Generation (2017-2025)

Think ahead when driving  
Repeated acceleration and braking will increase fuel consumption. Keeping a close eye on the traffic can help to avoid frequent  
acceleration and braking. Keeping your vehicle at a sufficient distance from the vehicle in front can help you to think ahead when  
driving.  
Avoid strong acceleration  
The rolling and air resistance increase at excessively high speeds. This in turn increases the force needed to move the vehicle. Never  
drive the vehicle at top speed.  
Observe the correct tyre pressures  
An inadequate tyre pressure does not just mean greater wear, but also increases the rolling resistance of the tyres and thus the fuel  
consumption. Use tyres with optimised rolling resistance.  
Adjust the tyre pressure according to the vehicle load:  
Observe the information on the tyre pressure sticker (→ Tyre pressure).  
Tyre Pressure Loss Indicator (→ Tyre Pressure Loss Indicator).  
Driving the engine warm  
Frequent short journeys can lead to foreign substances, e.g. condensation water, accumulating in the engine oil, which in turn can lead  
to increased engine wear.  
If the driving behaviour leads to an increased accumulation of foreign matter in the engine oil, a text message will appear in the  
instrument cluster display. In this case, drive the engine warm until the operating temperature is reached and the message disappears.  
At low outside temperatures, it may take longer for the engine to warm up and reach operating temperature. This is quite  
normal, and no cause for concern.  
Use low viscosity engine oils  
Synthetic, low viscosity engine oils decrease frictional resistance in the engine and spread better and more quickly, especially for cold  
starts.  
WARNING  
Lack of attention when driving in traffic can cause accidents and serious or fatal injuries.  
Always observe the current traffic regulations and speed limits and think ahead when driving.  
When travelling long distances, stop and take a break regularly – at least around every 2 hours.  
WARNING  
Alcohol, drugs, medication and narcotics can severely impair perception, reaction times and driving safety. This could cause you to  
lose control of the vehicle. This can cause accidents and serious or fatal injuries.  
Do not drive under the influence of alcohol, drugs, medicines and narcotics.  
WARNING  
Driving at high speed and without a sufficient safety distance can lead to accidents and serious or fatal injuries.  
Adapt your speed and distance from the vehicles ahead to suit visibility, weather, road and traffic conditions.  
A new combustion engine has to be run in during the first 1,500 km (approx.) (about 1,000 miles). All moving parts have to adapt  
themselves to each other. During the first few operating hours, the combustion engine has higher internal friction than it does later.  
Up to about 1000 km (about 600 mi)  
Avoid strong acceleration.  
Do not operate the combustion engine at more than 2/3 of the maximum engine speed.  
Do not drive with a trailer attached.  
Between about 1,000 and 1,500 km (about 600 to 1,000 miles)  
1. Gradually increase speed and engine speed.  
The driving style during the first 1,500 km (approx.) (about 1,000 miles) will also affect the quality of the combustion engine. In order  
to reduce engine wear and increase the possible mileage, the vehicle should also be driven at moderate engine speeds afterwards –  
especially when the combustion engine is cold.  
New tyres and brake pads have to be run in carefully.  
NOTICE  
Driving with an engine speed that is too low can lead to increased wear and damage to the engine.  
Do not drive at engine speeds that are too low.  
Shift down a gear if the combustion engine is not running “smoothly.  
If the new combustion engine is run in gently, its life will be increased and its oil consumption reduced.