Advertisement

Advertisement

Vision -> Coming Home and Leaving Home function (orientation lighting) for Your Volkswagen Tayron SUV First Generation (2018-2025)

WARNING  
Accidents and serious or fatal injuries can occur if the vehicle is parked without sufficient illumination, as other road users might have  
difficulty seeing the vehicle, or may not see it at all.  
Always park the vehicle safely and with sufficient lighting.  
Observe any applicable country-specific legal requirements.  
Switch on the parking light on the right or left side if possible if illumination of the vehicle for several hours is necessary.  
The Coming Home and Leaving Home function lights up the area immediately surrounding the vehicle when you get in or out of the  
vehicle in darkness.  
The Coming Home and Leaving Home function is controlled automatically by a light sensor.  
Switching on the Coming Home function  
1. Switch off the ignition.  
The Coming Home lighting is switched on if the automatic lighting control function  
sensor has detected darkness.  
is switched on and the rain and light  
The switch-off delay starts when the last vehicle door or the boot lid is closed.  
Switching off the Coming Home function  
1. Switch on the ignition.  
press the light switch repeatedly until the light is switched off.  
automatically after the set switch-off delay has elapsed.  
automatically if a vehicle door or the boot lid is opened approximately 30 seconds after switch-on.  
Switching on the Leaving Home function  
1. Unlock the vehicle.  
The Leaving Home lighting is switched on if the automatic lighting control function  
sensor has detected darkness.  
is switched on and the rain and light  
Switching off the Leaving Home function  
1. Switch on the ignition.  
lock the vehicle.  
press the light switch repeatedly until the light is switched off.  
automatically after the set switch-off delay has elapsed.  
Setting the Coming Home and Leaving Home functions  
The switch-off delay can be set and the function activated or deactivated in the vehicle settings in the Infotainment system (→ Vehicle  
settings menu).  
Depending on the equipment, the behaviour of the exterior lighting can be set in the vehicle settings in the Infotainment system.  
You can select from several display strategies:  
Classic.  
The surround lighting, headlights and tail light clusters are switched on and off simultaneously.  
Animation.  
The surround lighting, headlights and tail light clusters are switched on and off dynamically and in some cases with animation. The  
exterior lighting is animated in different ways depending on the set animation.  
Some settings can be stored in the personalised user accounts and therefore change when the user account changes.  
When dipped beam is switched on, a cornering light is switched on when turning slowly or driving around very tight bends.  
When reverse gear is engaged, the cornering light on both sides of the vehicle switches on to provide better illumination of the  
surrounding area when manoeuvring.