Advertisement

Advertisement

Vision -> Wipers for Your Volkswagen Tayron SUV First Generation (2018-2025)

On the left-hand side of the steering column: lever for turn  
signal, main beam and wipers.  
The wipers function only when the ignition is switched on and the bonnet or boot lid are closed.  
1
2
3
Operating the front windscreen wipers  
Operating the front windscreen flick wipe function and the wash and wipe system.  
Operating the rear window wiper.  
Switch on the windscreen wipers  
1. Switch on the ignition.  
2. Turn the switch to the required position → Fig. 1 1 :  
Fast wipe.  
Slow wipe.  
Vehicles without rain and light sensor: Interval wipe. There are two wiping interval settings.  
Vehicles with rain and light sensor: Automatic wiping depending on the intensity of the rain. There are two settings for the  
sensitivity of the rain and light sensor.  
Switching off the front windscreen wipers  
1. Turn switch → Fig. 1 1 to the  
position.  
Flick wipe – switching short wiping on and off  
1. Switch on the ignition.  
2. Push the → Fig. 1 2 button to the first position and hold →  
.
To switch off the flick wipe function, release the button.  
Switching the wash and wipe system on and off for cleaning the front windscreen  
1. Switch on the ignition.  
2. Push the → Fig. 1 2 button to the second position and hold →  
.
To switch off the wash and wipe system, release the button.  
To avoid the smell of the washer fluid in the vehicle interior, Climatronic switches to air recirculation mode for around  
30 seconds.  
Switching on the rear window wiper  
1. Switch on the ignition.  
2. Move switch → Fig. 1 3 to the centre position  
.
The wiper will wipe the window approximately every six seconds.  
Switching off the rear window wiper  
1. Move switch → Fig. 1 3 to the left to the  
position.  
Switching the wash and wipe system on and off for the rear window wiper  
1. Switch on the ignition.  
2. Move switch → Fig. 1 3 to the right position and hold →  
.
To switch off the wash and wipe system, release the button.  
WARNING  
Without adequate anti-freeze, the washer fluid may freeze onto the windscreen and obscure your view. This can cause accidents and  
serious or fatal injuries.  
At winter temperatures, use the window washer system only when adequate anti-freeze has been added.  
Never use the windscreen washer system at winter temperatures before the windscreen has been heated by the ventilation  
system.  
WARNING  
Worn or dirty windscreen wiper blades reduce visibility and increase the risk of accidents and severe injuries.  
Always change the wiper blades if they are damaged or worn and no longer clean the windscreen properly (→ Wiper blades).  
NOTICE  
Incorrect handling of the wipers can lead to damage to the windscreen and wiper blades and also to the wiper motor.  
Before starting your journey and switching on the ignition, check to make sure that the wiper lever is in its basic position.  
Remove snow and ice from the wipers and windows.  
Always carefully loosen wiper blades that have become frozen onto the window.  
Do not switch on the wipers when the window is dry.  
When switched on, the wipers will temporarily be switched to the next setting down when the vehicle is stationary.  
Some settings can be stored in the personalised user accounts and therefore change when the user account changes.  
If the vehicle is parked during cold weather, the service position of the windscreen wiper may be helpful in order to be able to  
release the wiper blades better from the windscreen (→ Wiper blades).  
Window wipe/wash system for cleaning the windscreen or rear window  
The window wipe/wash system cleans the windscreen or rear window with the wipers and washer fluid. To ensure that the system  
functions correctly in all weather conditions, sufficient anti-freeze must be added to the washer fluid (→ Washer fluid).  
NOTICE