Advertisement

Advertisement

Vision -> Window wipe/wash system for Your Volkswagen Tayron SUV First Generation (2018-2025)

To switch off the wash and wipe system, release the button.  
To avoid the smell of the washer fluid in the vehicle interior, Climatronic switches to air recirculation mode for around  
30 seconds.  
Switching on the rear window wiper  
1. Switch on the ignition.  
2. Move switch → Fig. 1 3 to the centre position  
.
The wiper will wipe the window approximately every six seconds.  
Switching off the rear window wiper  
1. Move switch → Fig. 1 3 to the left to the  
position.  
Switching the wash and wipe system on and off for the rear window wiper  
1. Switch on the ignition.  
2. Move switch → Fig. 1 3 to the right position and hold →  
.
To switch off the wash and wipe system, release the button.  
WARNING  
Without adequate anti-freeze, the washer fluid may freeze onto the windscreen and obscure your view. This can cause accidents and  
serious or fatal injuries.  
At winter temperatures, use the window washer system only when adequate anti-freeze has been added.  
Never use the windscreen washer system at winter temperatures before the windscreen has been heated by the ventilation  
system.  
WARNING  
Worn or dirty windscreen wiper blades reduce visibility and increase the risk of accidents and severe injuries.  
Always change the wiper blades if they are damaged or worn and no longer clean the windscreen properly (→ Wiper blades).  
NOTICE  
Incorrect handling of the wipers can lead to damage to the windscreen and wiper blades and also to the wiper motor.  
Before starting your journey and switching on the ignition, check to make sure that the wiper lever is in its basic position.  
Remove snow and ice from the wipers and windows.  
Always carefully loosen wiper blades that have become frozen onto the window.  
Do not switch on the wipers when the window is dry.  
When switched on, the wipers will temporarily be switched to the next setting down when the vehicle is stationary.  
Some settings can be stored in the personalised user accounts and therefore change when the user account changes.  
If the vehicle is parked during cold weather, the service position of the windscreen wiper may be helpful in order to be able to  
release the wiper blades better from the windscreen (→ Wiper blades).  
Window wipe/wash system for cleaning the windscreen or rear window  
The window wipe/wash system cleans the windscreen or rear window with the wipers and washer fluid. To ensure that the system  
functions correctly in all weather conditions, sufficient anti-freeze must be added to the washer fluid (→ Washer fluid).  
NOTICE  
Washer fluid without sufficient anti-freeze can freeze in the water-carrying hoses and washer fluid reservoir at low temperatures.  
This can result in damage to the washer fluid pump.  
Always use washer fluid with sufficient anti-freeze.  
Automatic activation of the rear window wiper  
The rear window wiper is switched on automatically when the windscreen wipers are switched on and reverse gear is engaged.  
Automatic activation when reverse gear is engaged can be activated and deactivated in the vehicle settings in the Infotainment system  
(→ Vehicle settings menu).  
Rear view camera cleaning system  
The rear view camera cleaning system cleans the rear view camera and works in conjunction with the wash and wipe system for  
cleaning the rear window.  
If the view from the camera remains obscured after it has been cleaned several times, the camera lens must be cleaned manually  
(→ Rear view), (→ Vehicle care, exterior).  
On the left-hand side of the steering column: lever for turn  
signal, main beam and wipers.  
A
B
C
The rain and light sensor is deactivated.  
Rain and light sensor activated, setting 1.  
Rain and light sensor activated, setting 2.  
When the rain and light sensor is activated, it automatically controls the frequency and speed of the wipers, depending on the intensity  
of the rain.  
The automatic wipe function can be activated and deactivated in the vehicle settings in the Infotainment system (→ Vehicle settings  
menu) →  
.
Activating the rain and light sensor  
1. Switch on the ignition.  
2. Turn the switch to the required position → Fig. 1:  
Position B : Low sensitivity of the rain and light sensor.  
Position C : High sensitivity of the rain and light sensor.  
If the automatic wipe function is deactivated in the Infotainment system, the intervals are set at fixed levels.  
Deactivating the rain and light sensor