Advertisement

Advertisement

Vision -> Parking lights for Your Volkswagen Tayron SUV First Generation (2018-2025)

On the left-hand side of the steering column: lever for turn  
signal, main beam and wipers.  
A
B
Right-hand parking light is switched on.  
Left-hand parking light is switched on.  
Switching one-sided parking lights on and off  
When the parking lights are switched on, the headlight with side light and parts of the tail light cluster on the corresponding side of  
the vehicle light up. The activation duration of the one-sided parking light is generally twice that of the continuous parking light on  
both sides.  
1. Switch off the ignition.  
2. Move the lever from the centre position to the desired position → Fig. 1.  
3. To switch off the one-sided parking light, move the lever to the basic position.  
Switching the continuous parking light on both sides of the vehicle on and off  
Both headlights light up with side lights as well as parts of the tail light clusters if continuous parking light on both sides of the vehicle  
is switched on:  
1. Switch on the side lights  
2. Switch off the ignition.  
.
3. Lock the vehicle from outside.  
4. To switch off the continuous parking light on both sides of the vehicle, unlock the vehicle from the outside.  
Automatic switch-off of side lights and parking lights  
The vehicle will detect a weak 12-volt vehicle battery and switch off the side lights or parking lights in good time so that the engine  
can still be started – however, this will occur after 2 hours at the earliest.  
If the battery capacity is not sufficient for the side lights or parking light to remain switched on for 2 hours, the 12-volt vehicle battery  
can be discharged to such an extent that it is no longer possible to start the engine →  
.
WARNING  
Accidents and serious or fatal injuries can occur if the vehicle is parked without sufficient illumination, as other road users might have  
difficulty seeing the vehicle, or may not see it at all.  
Always park the vehicle safely and with sufficient lighting.  
Observe any applicable country-specific legal requirements.  
Switch on the parking light on the right or left side if possible if illumination of the vehicle for several hours is necessary.  
The Coming Home and Leaving Home function lights up the area immediately surrounding the vehicle when you get in or out of the  
vehicle in darkness.  
The Coming Home and Leaving Home function is controlled automatically by a light sensor.  
Switching on the Coming Home function  
1. Switch off the ignition.  
The Coming Home lighting is switched on if the automatic lighting control function  
sensor has detected darkness.  
is switched on and the rain and light  
The switch-off delay starts when the last vehicle door or the boot lid is closed.  
Switching off the Coming Home function  
1. Switch on the ignition.  
press the light switch repeatedly until the light is switched off.  
automatically after the set switch-off delay has elapsed.  
automatically if a vehicle door or the boot lid is opened approximately 30 seconds after switch-on.  
Switching on the Leaving Home function  
1. Unlock the vehicle.  
The Leaving Home lighting is switched on if the automatic lighting control function  
sensor has detected darkness.  
is switched on and the rain and light  
Switching off the Leaving Home function  
1. Switch on the ignition.  
lock the vehicle.  
press the light switch repeatedly until the light is switched off.  
automatically after the set switch-off delay has elapsed.  
Setting the Coming Home and Leaving Home functions  
The switch-off delay can be set and the function activated or deactivated in the vehicle settings in the Infotainment system (→ Vehicle  
settings menu).  
Depending on the equipment, the behaviour of the exterior lighting can be set in the vehicle settings in the Infotainment system.  
You can select from several display strategies:  
Classic.  
The surround lighting, headlights and tail light clusters are switched on and off simultaneously.