Get Data transmission Guide for Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Data transmission

Cyber security

Cyber security describes measures that

reduce the risk of illegal access to

vehicle functions, data and control

modules caused by malware or an

Internet attack. Of all the components

in the vehicle, connectivity components

are most at risk of unauthorized access

or cyber attacks.

Connectivity components comprise control modules for data transmission, interfaces, media and diagnostic connections

through which information and data can be exchanged between the vehicle and mobile devices or the Internet.

Connectivity components are equipped with security mechanisms to minimize the risk of unauthorized access to vehicle

systems.

Connectivity components include in particular:

Diagnostic connection port

Control module with installed eSIM card.

Phone interface

App-Connect.

Wi-Fi® hotspot.

NFC radio technology.

AUX-IN jack.

Bluetooth® interface.

CD/DVD drive.

USB port.

SD card slot.

SIM card slot.

The type and number of connectivity components present in your vehicle depends on the vehicle equipment and the

country.

Software and security mechanisms

Software and security mechanisms available in the vehicle undergo continuous development. Similar to computers or

operating systems on cell phones, software and security mechanisms in the vehicle may also be updated at various times.

System updates improve the security, stability and operating speed of vehicle systems. The system update is a preventative

measure, for example, to protect from malware and to optimize functionality.

A system update is used to update the software of control modules in the vehicle.

Depending on the vehicle and country, there are two ways to update your vehicle:

System update by a suitably qualiﬁed authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

System update via an Over-the-Air Update.

WARNING

321

In spite of the integrated security mechanisms and regular system updates or Over-the-Air Updates, malware can cause

malfunctions in control modules and the vehicle. In the same way, connecting computers, data carriers or cell phones that

are infected with viruses can result in malfunctions in control modules and the vehicle. Malfunctions may cause serious

accidents and fatal injuries.

If the vehicle works or reacts differently to normal, reduce your speed in a controlled manner.

Contact qualiﬁed professionals for assistance. Volkswagen recommends contacting an authorized Volkswagen

dealer or authorized Volkswagen Service Facility.

NOTICE

Malware can access data and information stored in the control modules, in the Infotainment system, on connected data

carriers and in paired cell phones. This may result in a complete loss of data or damage control modules, the Infotainment

system, computers, data carriers or cell phones.

Carry out all pending Over-the-Air Updates as quickly as possible once they are made available, or allow system

updates to take place. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility for

assistance. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen

Service Facility.

Protect computers, data carriers and cell phones with a suitable antivirus program and by taking generally

recognized precautions. Regularly update the antivirus program using the supplied system updates or upgrades

provided by the vendor.

Minimizing risks

You can actively help to reduce the risk of unauthorized access to vehicle systems and functions by following these

guidelines:

Only use data carriers, Bluetooth devices and cell phones in the vehicle that do not contain any manipulated data or

malware.

Ensure that system updates provided by Volkswagen are carried out by an authorized Volkswagen dealer or authorized

Volkswagen Service Facility as soon as possible once they are made available. Volkswagen recommends contacting an

authorized Volkswagen dealer or authorized Volkswagen Service Facility. If the option to perform an Over-the-Air Update

is available, depending on the vehicle and country, carry out all Over-the-Air Updates provided by Volkswagen

immediately. If the Over-the-Air Update is ignored multiple times by the driver, an authorized Volkswagen dealer or

authorized Volkswagen Service Facility must be contacted for assistance. Volkswagen recommends contacting an

authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Only have the vehicle repaired and serviced by suitably qualiﬁed professionals. Volkswagen recommends contacting an

authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Over-the-Air Update

Introduction

Over-the-Air Updates enable us to

ensure that your vehicle is always kept

up to date, e.g. to protect against

malware and optimize functionality.

How can you tell that an Over-the-Air Update is pending?

A pending Over-the-Air Update is displayed in the Infotainment system.

322

If multiple Over-the-Air Updates are available for the vehicle at the same time, one Over-the-Air Update must be completed

successfully before the next Over-the-Air Update can be carried out.

It is in your best interests to perform Over-the-Air Updates as promptly as possible. If the Over-the-Air Update is ignored

multiple times by the driver, an authorized Volkswagen dealer or authorized Volkswagen Service Facility must be contacted

for assistance. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service

Facility.

WARNING

In very rare circumstances, it is possible that a control module may no longer work properly after an Over-the-Air Update.

Malfunctions in a control module and the vehicle can cause serious accidents and fatal injuries.

If the vehicle works or reacts differently to normal while driving, reduce your speed in a controlled manner.

Contact qualiﬁed professionals for assistance. Volkswagen recommends contacting an authorized Volkswagen

dealer or authorized Volkswagen Service Facility.

WARNING

If the digital instrument cluster malfunctions after an Over-the-Air Update, it will not be possible to display instruments,

warning lights, symbols or messages. Driving with a malfunctioning instrument cluster can lead to serious accidents and

fatal injuries.

Do not use the vehicle. Contact Volkswagen Customer Care.

NOTICE

If special modiﬁcations are made to vehicles outside of the responsibility of Volkswagen AG, such as for service vehicles

or taxis, there is a risk that these special functions, e.g. taximeter, will no longer work properly after an Over-the-Air

Update.

Contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility before performing an Over-

the-Air Update.

Measures to increase performance or efficiency (e.g. engine tuning) that are not performed by Volkswagen may be

reverted by an Over-the-Air Update.

Depending on the vehicle equipment, “release notes” that describe the changes to the vehicle status may be displayed

once before or after an Over-the-Air Update.

Requirements for an Over-the-Air Update

Please read the introductory information and heed the Warnings and Notice ⇒

The following requirements must be met for an Over-the-Air Update to be downloaded and the software installation for an

and Introduction.

Over-the-Air Update to be carried out.

The “Over-the-Air Update” function is available in your country.

You have concluded an active VW Car-Net® contract.

You have assigned the vehicle to your active Volkswagen user account.

There is a primary user; it may be necessary for you to log in as the primary user.

The vehicle is in an area with enough mobile reception.

323

The 12-volt vehicle battery is sufﬁciently charged.

Downloading and installing an Over-the-Air Update

Please read the introductory information and heed the Warnings and Notice ⇒

and Introduction.

Download costs

An Over-the-Air Update is downloaded via the factory-installed control module with an eSIM card and is free of charge.

Volkswagen pays the connection charges.

Time of download

The download takes place automatically without a prior notiﬁcation and is possible even while driving. Once the download has

been completed, you will receive notiﬁcation of a pending Over-the-Air Update.

The download time depends on the network quality, file size and Over-the-Air Update type. It may be the case that the

download is interrupted. In this case, the download will resume when the ignition is switched on.

Requirements for software installation

The vehicle is parked safely in accordance with legal requirements and local conditions ⇒ Parking and maneuvering.

The previous Over-the-Air Updates have been installed.

Software Installation of the Over-the-Air Update

Select a time for the Over-the-Air Update during which the vehicle does not need to be driven by you or anyone else.

WARNING

Control units are deactivated and will not be operational for the duration of the software installation. Driving with

deactivated or non-functioning control units can lead to accidents and fatal injuries.

Carry out the software installation so that other road users are not affected.

Never operate your vehicle during a software installation.

1. Stop the engine and set the electronic parking brake.

2. Close the engine hood, trunk lid, all windows, the tilting and sliding panoramic sunroof if necessary, and all doors.

3. Conﬁrm the software installation in the Infotainment system.

4. Ensure that all vehicle occupants leave the vehicle and that no animals are left in the vehicle.

5. Exit the vehicle, taking all vehicle keys with you.

6. Lock the vehicle.

Functional limitations during software installation

The control modules, the main computer, functions and displays will not be available during software installation. Do not use

the vehicle during this process and do not operate the Infotainment system.

Mobile online services are not available.

The Emergency Call Service, Roadside Call Assist and the legally required eCall Emergency System are not available.

Park Distance Control is not available.

Following the software installation

324

After the software installation and before starting the engine, read the message regarding completion of the software

installation in the Infotainment system or instrument cluster. The vehicle will require up to 1 minute to display the status of the

Over-the-Air Update.

After a successful software installation, you can continue to use the vehicle again.

If the software installation is unsuccessful: ⇒ Troubleshooting.

Troubleshooting

Please read the introductory information and heed the Warnings and Notice ⇒

and Introduction.

Installation of an Over-the-Air Update has failed

If the installation of an Over-the-Air Update was not successful, a corresponding error message will appear in the

Infotainment system or instrument cluster. Take note of corresponding messages and warning notiﬁcations.

If there was a critical installation error, control modules may no longer function or not function correctly. Functions and

displays will not be available until the error is rectified. Do not use the vehicle. If this is the case, contact Volkswagen

Customer Care.

Can I interrupt the installation of an Over-the-Air Update?

No, this is not possible.

What happens if installation of an Over-the-Air Update is interrupted?

If installation is interrupted, e.g. due to damage to the vehicle's electrical system, control modules may not be updated and

may be damaged by the incomplete installation of the Over-the-Air Update.

Wired and wireless connections

Introduction

Mobile devices can be connected to the Infotainment system via the wired and wireless connections in the vehicle.

The type and number of wired and wireless connections depends on the vehicle equipment and the country. The connections

may differ within a model line or in a model with optional equipment.

In wired connections, only use the original connecting cable that belongs to the device or the connecting cable that was place

in the vehicle at the factory, if available.

If the plug on the connector cable cannot be inserted, check the position and the connections.

NOTICE

Using unsuitable or damaged connector cables or inserting the plug on the connector cables in the wrong position or too

forcefully may cause malfunctions and damage to devices.

Only use suitable and undamaged connector cables.

Hold the plug on the connector cable in the correct position and insert it into the intended socket while pressing

lightly. Pressing strongly can damage the device connection and the plug on the connector cable.

The connector cable must not be pinched or bent sharply.

If a connected device is not recognized, disconnect all connected devices and then reconnect the device. Check the function

of the connector cable used, if necessary.

If malfunctions occur in a connected device, restart the device. This sometimes fixes the error.

325

USB port

Please read the introductory information and heed the Warnings and Notice ⇒

Introduction.

Using the USB port, you can transfer

data and charge devices or only

charge devices.

USB-C port

Fig. 168 USB-C connection in the vehicle (general example).

The vehicle may contain the following USB-C ports:

Symbol for a USB port for data transmission and charging. Symbol for a USB port for charging only.

You can ﬁnd information about charging options and charging power here ⇒ Charging Options for Mobile Devices.

Possible USB port installation locations

The number and installation locations of USB ports depend on the vehicle and vehicle equipment and are not available in all

countries.

In the center console.

At the base of the interior rearview mirror.

In the storage compartment in the center console.

In the compartment underneath the center armrest.

USB ports at the rear seats only come with a charging function.

Available Data Transfer Functions

The following USB data transfer functions are available depending on the vehicle equipment.

App-Connect ⇒ App-Connect.

Media playback ⇒ Media.

Update, e.g. of the navigation data ⇒ Navigation data.

Instructions and restrictions

326

Only use suitable USB connection cables. The USB connection cable must match the USB port installed in the vehicle.

Dirty, overheated or damaged data carriers are not to be used. Read and heed the information provided by the

manufacturer.

Difference in quality between data carriers from different manufacturers can cause problems with media playback.

Using USB extension cables, USB adapters or USB hubs may result in malfunctions or failure of the USB functions.

Bluetooth® interface

Please read the introductory information and heed the Warnings and Notice ⇒

The Bluetooth interface is a wireless connection.

Introduction.

In Bluetooth audio mode, audio ﬁles on a mobile device that is connected via Bluetooth, such as a cell phone, can be played

through the vehicle speakers.

Bluetooth audio mode is only possible in vehicles equipped with a factory-installed mobile phone interface that supports this

function.

Bluetooth proﬁles

A maximum of three mobile devices can be connected via Bluetooth at the same time.

The following Bluetooth proﬁles may be available in the speciﬁed version or in another version:

HFP 1.7.

Telephony and handsfree mode.

A2DP 1.3.

Music playback.

AVRCP 1.6.

Display and operation for music playback.

Transfer of cover art.

PBAP 1.2.

Access to phone book and call lists.

MAP 1.4.

Access to SMS and e-mail.

Pairing Your Mobile Device to Your Vehicle Via Bluetooth

1. Tap MENU

Network

Mobile devices

.

2. Activate Bluetooth.

3. Activate Visibility.

4. Open the list of available Bluetooth devices on your mobile device and select the device name for the Infotainment

system.

5. Pay attention to messages on your mobile device and in the Infotainment system and conﬁrm these if necessary.

If the pairing is successful, the data on the mobile device will be saved in the user proﬁle.

6. Optional: conﬁrm the message for transferring the data on the mobile device.

Controlling playback

The extent to which the mobile device connected via Bluetooth can be controlled via the Infotainment system depends on the

mobile device.

327

For media players that support the AVRCP Bluetooth proﬁle, playback from the mobile device can be started or stopped

automatically when Bluetooth audio mode or another audio source is selected.

Because of the large number of possible mobile devices, it is not possible to guarantee that all functions described can be

performed correctly.

In general, all warning and operation tones on connected mobile devices, such as touch tones on a cell phone, should be

switched off to avoid interference and malfunctions.

Depending on the device, if a mobile device is connected to the Infotainment system via Bluetooth and the USB port

at the same time, the Bluetooth audio connection may be automatically disconnected.

Connecting an External Audio Source via Wi-Fi®

Please read the introductory information and heed the Warnings and Notice ⇒

The Wi-Fi connection is a wireless connection.

Introduction.

In Wi-Fi audio mode, sources such as cell phones that are connected via Wi-Fi can be used for audio streaming.

The availability of the Wi-Fi function depends on the country and the Infotainment system being used.

Requirements

The connected audio source has a suitable app or supports media sharing using the UPnP standard.

There must be a Wi-Fi connection to the audio source.

Starting Audio Streaming via Wi-Fi

1. Lower the volume on the Infotainment system.

2. Tap MENU

3. Start the UPnP server application or a suitable app for audio streaming on the Wi-Fi audio source.

4. Tap and select Wi-Fi.

5. Follow the instructions shown on the Infotainment system screen and on the Wi-Fi audio source screen.

to open the Media main menu.

The function key for selecting the audio source

in the Media main menu can vary if another audio source is connected with

the Infotainment system, e.g. by USB

, and is selected.

Controlling playback

The extent to which the Wi-Fi audio source can be controlled by the Infotainment system depends on the type of Wi-Fi audio

source that is connected.

Internet use in the vehicle

Introduction

In order to use selected In-Car Apps or streaming for Internet Radio, you need an Internet connection in your vehicle. You

have two options for using the Internet in your vehicle: via the hotspot of a mobile device, e.g. a cell phone, or via the eSIM of

the vehicle, depending on the country and the vehicle equipment ⇒ Setting up the Internet connection.

Regardless of how you establish the Internet connection, whether via a mobile device hotspot or via the eSIM of the vehicle,

you can use the Infotainment system as a Wi-Fi® hotspot for eight other mobile devices ⇒ Quick connection. This function

depends on the vehicle equipment and is not available in all vehicles.

If you want to use the eSIM for Internet access, you need to purchase data plans via the online shop of the Volkswagen

mobile communications partner.

328

Setting up the Internet connection

Using the Internet in the vehicle via the eSIM

In order to use an Internet connection via the eSIM of the vehicle, you need to purchase data plans in the online shop of

Volkswagen's external mobile network provider. If you have activated the Top up in vehicle function during registration, you ca

then purchase data plans directly in the vehicle via the Infotainment system.

To activate the Internet connection via the eSIM:

1. Tap HOME

Data connection.

Or: Tap MENU

2. Activate Streaming via integrated data connection (eSIM).

The option for using an Internet connection in the vehicle via the eSIM depends on the vehicle equipment and the country.

Using an Internet connection via a mobile device

Depending on your mobile data rate, additional costs, such as roaming fees, may result from downloading and using data

plans online, especially in other countries. Volkswagen recommends using a mobile phone plan with a flat rate data

package due to the possible volume of data. Information on this can be obtained from the mobile network provider.

1. Activate tethering/Wi-Fi hotspot on the mobile device, see the manufacturer's operating instructions.

2. Tap HOME

Wi-Fi

Wi-Fi:.

Or: Tap MENU

Wi-Fi

3. Tap Search for Wi-Fi.

The Infotainment system scans for Wi-Fi hotspots in the area. This scan process can take a few seconds.

4. Select the Wi-Fi network for the preferred mobile device.

5. Enter the mobile device network key in the Infotainment system and conﬁrm it.

The Wi-Fi connection between the mobile device and the Infotainment system is established. It may be necessary to

make further inputs on the mobile device in order to complete the connection.

Due to the large number of mobile devices that are available, there is no guarantee that all functions will always be

available.

The availability of the function for using the Infotainment system as a Wi-Fi hotspot depends on the country and may

vary.

Setting Up and Deactivating a Wi-Fi® Hotspot

Depending on the vehicle equipment, the Infotainment system can be used as a Wi-Fi hotspot for Internet access for up to

eight mobile devices, e.g. tablets.

To enable the Infotainment system to be used as a Wi-Fi hotspot, an Internet connection is required, e.g. via the eSIM in the

vehicle or via the hotspot of a mobile device ⇒ Setting up the Internet connection.

The possible types of Internet connections depend on the country and the Infotainment system being used.

Determining network information

Requirements

Your vehicle has been added to your VW Car-Net® account.

You have paid for a data plan for your vehicle.

1. Log in to your Volkswagen user account via the VW Car-Net® app or the Car-Net portal and select the vehicle.

329

2. Select the network name (SSID) and network key (password) for the vehicle as follows:

In the portal, under User

Wi-Fi SSID and password.

Wi-Fi SSID & password.

Or: in the app, under User

Connecting to Wi-Fi

1. Tap HOME

Wi-Fi

Infotainment system as hotspot.

Wi-Fi Infotainment system as hotspot.

Or: Tap MENU

Settings

2. Tap Use as hotspot and activate it.

3. Search for available networks on the cell phone.

4. Select from the network names (SSID).

5. Enter and conﬁrm the network key.

The Wi-Fi connection will be established. If necessary, you may need to enter additional information on the cell phone in

order to complete the connection.

6. Optional:

Repeat the process to connect additional cell phones.

Deactivating a Wi-Fi Hotspot

1. Tap HOME

Wi-Fi

Infotainment system as hotspot.

Wi-Fi Infotainment system as hotspot.

Or: Tap MENU

Settings

2. Tap Use as hotspot and deactivate it.

The Wi-Fi hotspot is deactivated.

Quick connection

Quick connection makes it possible to easily and quickly set up a wireless local network with encryption. In several countries,

the function can alternatively be executed by scanning in a QR code.

WPS with the Infotainment System as a Wi-Fi® Hotspot

1. Tap MENU

Wi-Fi

Mobile hotspot Wi-Fi:.

2. Tap WPS quick connection (WPS button).

3. Activate WPS on the mobile device to be connected.

The Wi-Fi connection will be established. It may be necessary to make further inputs on the mobile device in order to

complete the connection.

4. To connect additional mobile devices, repeat this process.

Only one WPS connection can be established at a time. If multiple connection attempts start at the same time, all

connection attempts will fail.

WPS with Infotainment system as client

1. Tap MENU

Settings

Wi-Fi

Wi-Fi.

2. Tap WPS quick connection (WPS button).

3. Activate WPS on the mobile device.

The Wi-Fi connection will be established. It may be necessary to make further inputs on the mobile device in order to

complete the connection.

330

WPS is not supported by all mobile devices. In this case, connect manually:

1. Set up the Infotainment system as a Wi-Fi hotspot ⇒ Internet use in the vehicle.

2. Connecting the Infotainment system as a client to the hotspot of a mobile device ⇒ Setting Up and Deactivating a Wi-

Fi® Hotspot.

Technical Properties

The technical properties of the Internet connections in the vehicle listed here may differ depending on the equipment and

country.

Wi-Fi® in accordance with IEEE 802.11 b/g/n.

2.4 GHz and 5 GHz data transfer.

Two Wi-Fi modes at once:

Tethering (2.4 GHz).

2.4 GHz access point.

Up to eight mobile devices can be connected at the same time.

Internet connection via Wi-Fi:

Tethering via cell phone.

Hotspot for clients in the vehicle.

Apple CarPlay™ via Wi-Fi.

Android Auto™ via Wi-Fi.

Simpliﬁed pairing process via WPS, NFC or QR code.

Possible data connection types

SIM card in SIM card reader:

Suitable SIM card in the SIM card reader. Network settings

activated in the settings menu.

A stable network connection is only possible with a compatible SIM card.

Allow Internet connection is

Bluetooth Profile rSAP: The Infotainment system is connected to a suitable cell phone via the Bluetooth profile rSAP . Allow

Internet connection must be activated in the Network settings menu.

Mobile device: Use the Wi-Fi hotspot on a mobile device ⇒ Setting Up and Deactivating a Wi-Fi® Hotspot.

eSIM (embedded SIM): The vehicle has a control module with installed eSIM card (SIM). In order to use the Wi-Fi hotspot,

you need to purchase data plans via the In-Car Shop or via the online shop of our mobile communications partner.

The types of possible data connections depend on the country and equipment.

Requirements

Network settings

Allow Internet connection is activated in the settings menu.

Integrated data connection is activated.

Or: Data connection

App-Connect

Introduction

App-Connect makes it possible to display and control content and functions displayed on the cell phone through the

Infotainment system screen.

331

To do this, the cell phone must be connected to the Infotainment system via a USB interface with a data transfer function.

Some technologies can also be used with App-Connect Wireless via the Bluetooth interface and a Wi-Fi hotspot for the

Infotainment system.

The following technologies may be available:

Apple CarPlay™.

Apple CarPlay™ Wireless.

Android Auto™.

Android Auto™ Wireless.

The technologies listed above are operated by third parties and provided by Volkswagen. Volkswagen is not responsible if

these technologies are canceled, discontinued or deactivated during the service life of the vehicle. Apps from third-party

providers may be incompatible. It cannot be guaranteed that the apps that are offered will be able to run on all cell phones an

with all operating systems.

Which App-Connect technologies are available to you depends on the country and on the cell phone in use. Apps can be

based on many different designs and can also differ depending on the vehicle and country. The content, scope, and providers

of the apps may vary. The apps provided by Volkswagen can also be changed, canceled, deactivated, reactivated, and

enhanced without notice. Furthermore, some apps depend on the availability of services from third party providers.

You can ﬁnd more information on the Volkswagen website.

The use of apps and the required mobile phone connection may be subject to additional charges.

WARNING

Using apps while driving can distract from trafﬁc. Driver distraction can cause serious accidents and fatal injuries.

Only use apps and functions when the vehicle is stationary.

Always drive attentively and responsibly.

WARNING

If unsuitable apps are used or apps are not used correctly, this may result in vehicle damage and accidents with serious or

even fatal injuries.

Protect the cell phone and its apps from misuse.

Volkswagen is not responsible for vehicle damage that is caused by low-quality or malfunctioning third-party apps,

inadequate programming of third-party apps, insufficient network strength, data loss, misuse of mobile devices, or malware

on data carriers, computers, tablets and cell phones.

Symbols and settings for App-Connect

Please read the introductory information and heed the Warnings and Notice ⇒

Symbols in the App-Connect menu

Introduction.

The symbol display depends on the vehicle equipment and the country.

or

Show further information.

Open the App-Connect settings menu.

Select the Apple CarPlay technology.

Select the Android Auto technology.

332

Connecting a cell phone with App-Connect

Please read the introductory information and heed the Warnings and Notice ⇒

Introduction.

In order to use App-Connect or App-Connect Wireless, ﬁrst pair the cell phone with the Infotainment system. When using App

Connect Wireless, the connection is initiated via Bluetooth, and then established via the Wi-Fi hotspot for the Infotainment

system.

When using Apple CarPlay, the Bluetooth connection is disconnected again when the connection via the Wi-Fi hotspot for

the Infotainment system is established. When using Android Auto, the Bluetooth connection remains active.

Connecting a cell phone for the ﬁrst time

1. For App-Connect Wireless, connect the cell phone to Bluetooth and to the Wi-Fi hotspot of the Infotainment system

⇒ Bluetooth® interface, ⇒ Setting Up and Deactivating a Wi-Fi® Hotspot.

For App-Connect, connect the cell phone to the Infotainment system via USB cable.

2. Tap

.

Or: tap MENU

.

Or: press APP.

3. Select the cell phone and your preferred technology.

4. Allow the Infotainment system the required access. To do this, conﬁrm authorization requests on the cell phone.

App-Connect or App-Connect Wireless is set up.

If any pop-up menus were dismissed during the connection process, App-Connect or App-Connect Wireless will not be

available. In this case, Volkswagen recommends deleting the devices from the cell phone settings and Infotainment system

and restarting the connection process.

Apple CarPlay™

Please read the introductory information and heed the Warnings and Notice ⇒

Introduction.

Requirements

The following requirements must be met in order to use Apple CarPlay:

The iPhone must support Apple CarPlay.

Voice control (Siri) must be activated on the iPhone.

Apple CarPlay must be activated in the iPhone settings without restrictions.

For Apple CarPlay Wireless, Bluetooth must be activated on the iPhone and the Infotainment system must be activated

as a Wi-Fi® hotspot.

If Apple CarPlay Wireless cannot be used, the iPhone must be connected to the infotainment system via a USB

connection with data transfer. Only USB ports with data transfer are suitable for use with Apple CarPlay.

The USB cable being used must be an original cable from Apple.

These technologies may not be available in all countries.

Information on technical requirements, compatible iPhones, certified apps and availability can be found at the

Volkswagen and Apple CarPlay website or at an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Starting Apple CarPlay

1. Tap MENU App-Connect

to open the App-Connect main menu.

Or: press APP.

2. Tap

Apple CarPlay to connect to your iPhone.

333

Disconnecting

1. Tap

in Apple CarPlay mode to open the App-Connect main menu.

2. To end the active connection, tap

or

.

The presentation of the function keys in the display may vary.

Special conditions

During an active connection with Apple CarPlay, the following conditions apply:

For an iPhone connected with the Infotainment system via Apple CarPlay, phone functions can only be accessed via

Apple CarPlay.

The connected iPhone cannot be used as a media device in the Media main menu.

It is not possible to use the internal navigation and Apple CarPlay navigation at the same time. The route guidance which

was started last ends the previous active one.

Depending on your Infotainment system, you can view information about telephone operation in the instrument cluster

display.

Depending on your Infotainment system and the navigation app used, you can view upcoming turns in the instrument

cluster display.

You can accept or decline incoming calls or end a call in progress using the buttons on the multi-function steering wheel.

Voice control

The “voice control” function depends on the vehicle equipment.

1. Tap

brieﬂy to start the Infotainment system voice control.

Or: to start voice control (Siri) on the connected iPhone, tap and hold

.

Android Auto™

Please read the introductory information and heed the Warnings and Notice ⇒

Introduction.

Requirements

The following requirements must be met in order to use Android Auto:

The smartphone must support Android Auto.

An Android Auto app must be installed on the smartphone.

For Android Auto Wireless, Bluetooth® must be activated on your smartphone and in the Infotainment system. The

Infotainment system must also be activated as a Wi-Fi® hotspot.

If Android Auto Wireless cannot be used, the smartphone must be connected to the Infotainment system with a USB

connection that allows data transfer. Only USB ports with data transfer are suitable for use with Android Auto.

The USB cable used must be an original cable from your smartphone manufacturer.

These technologies may not be available in all countries.

Information on technical requirements, compatible smartphones, certified apps and availability can be found on the

Volkswagen and Android Auto websites or at an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Starting Android Auto

1. Tap MENU

to open the App-Connect main menu.

Or: press APP.

334

2. Tap

Android Auto to establish the connection with the smartphone.

Disconnecting

1. Tap Close

in Android Auto mode to open the App-Connect main menu.

2. Tap

to end the active connection.

Special conditions

During an active connection with Android Auto, the following conditions apply:

An active Android Auto device can also be connected with the Infotainment system via Bluetooth (hands-free proﬁle,

HFP) at the same time.

Phone functions are possible through Android Auto. The Infotainment system phone function can also be used if the

Android Auto device is connected to the Infotainment system via Bluetooth at the same time.

An active Android Auto device cannot be used as a media device in the Media main menu.

It is not possible to use the internal navigation and Android Auto navigation at the same time. The route guidance which

was started last ends the previous active one.

You can view information about telephone operation in the instrument cluster display.

Depending on your Infotainment system and the navigation app used, you can view upcoming turns in the instrument

cluster display.

You can accept or decline incoming calls or end a call in progress using the buttons on the multi-function steering wheel.

Voice control

The “voice control” function depends on the vehicle equipment.

1. Tap

brieﬂy to start the Infotainment system voice control.

button to start voice control of the connected smartphone.

Or: Tap and hold the

335

Data transmission for Your Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals