1. Close the hood, driver and front passenger door.
2. Switch the ignition on and off again.
3. Operate one-tap wiping (→ Windshield wipers).
Lifting the windshield wiper arms
1. Move the windshield wiper arms into the service position before lifting→
.
2. Only hold and lift wiper arms in the area where they attach to the wiper blade.
Placing the windshield wiper arms back
1. Before driving, carefully place the wiper arms back against the windshield, holding them only in the area where
they attach to the wiper blade.
2. To return the wiper arms to the home position, operate “one-tap wiping” when the ignition is switched on
(→ Windshield wipers).
The wiper arms move back to the original position.
NOTICE
Failing to take care when working on the wiper arms can damage the hood, windshield, or wiper arms.
● Lift the wiper arms with care, and only in the service position.
● Never open the hood when the wiper arms are raised up.
● Always place the wiper arms carefully against the windshield before driving.
Cleaning and changing wiper blades
Wiper blades with a graphite coating are installed at the factory. The graphite coating allows the wiper blade to glide
easily over the window. A damaged graphite coating creates an increased noise level when wiping the window.
—Check the condition of the wiper blades regularly.
—If wiper blades are rubbing, replace them if they are damaged or clean them if they are dirty→
.
Damaged wiper blades should be replaced immediately. Wiper blades can be obtained from suitably qualified
professionals. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen
Service Facility.
Cleaning the wiper blades
1. Put the wiper arms into the service position (→ Wiper blades).
2. Lift the wiper arms and only hold in the area where they attach to the wiper blade.
3. Clean the wiper blades carefully with a damp sponge→
4. Place the wiper arms carefully on the windshield.
.
Changing the windshield wiper blades
485