Replacing light bulbs
— About 30 seconds after all the doors have been
closed
Lighting operation
Switch
centre Automatic activation and deactivation
position
Front and rear lights on/off
Deactivating automatic switch-on
Left reading light
1. Release the connector.
2. Remove the connector from the bulb.
3. Turn the bulb and remove it.
Right reading light
If a door remains open and the ignition is
switched off, the lights are switched off auto-
matically after 10 minutes.
4. Insert the connector into the new bulb until it
clicks into place.
Securing the wheel arch liner
Settings
The brightness setting of the switching and instru-
ment lighting can be adjusted in the following Info-
tainment menu:
10" Infotainment system:
Car Lights settings
Interior background lighting
1. Refit the wheel arch liner.
2.
Screw in the A screws.
Use
The ambient lighting ensures a comfortable atmos-
phere inside the vehicle.
Interior lighting
The lighting only works when the dipped or parking
lights are on.
Operation
The lighting is also switched on automatically after
the door is opened.
Automatic activation
The lighting is activated when one of the following
events occurs:
— The vehicle is unlocked
— One of the doors is open
Settings
The ambient light brightness is adjusted in the fol-
lowing Infotainment menu:
— The ignition key is removed (vehicle without
starter button)
10" Infotainment system:
Car Lights settings
Automatic deactivation
The lighting is deactivated when one of the follow-
ing events occurs:
— The vehicle is locked
— The ignition is switched on
Interior lighting
51
English 
