CAUTION
Operating conditions
Halogen lamps are pressurised and may burst dur-
ing replacement!
Version 1
Applies to vehicles with automatic driving light
switch function.
Wear gloves and safety goggles.
·
NOTICE
✓
✓
Visibility has worsened.
Contamination of the halogen lamp reduces the life
of the lamp
The light switch is in the position
.
Do not touch the glass of the light bulb with your
bare fingers.
·
Version 2
Applies to vehicles without automatic driving light
switch function.
NOTICE
✓
The light switch is in the position
.
Risk of headlight damage due to ingress of water
and dirt
Always fit the protective cap correctly on the
headlight after changing a bulb.
·
Operation
Manual activation of Coming Home
Conditions for replacing a light bulb
Applies to vehicles without automatic driving light
switch function.
✓
✓
Ignition off
Lights off
1. Switch off the ignition.
2. Briefly hold the left lever under the steering
wheel in the
position (switching on the
headlight flasher).
3. Open the driver's door.
Front fog lights
The wheel arch liner must be loosened to access the
bulb.
Settings
Loosening the wheel arch liner
The function is set in the following menu in the Info-
tainment system:
10" Infotainment system:
Car Lights settings
Replace light bulbs
What you should be mindful of
You may replace the following light bulbs yourself.
Have the remaining light sources replaced by a spe-
cialist garage.
1.
2. Fold down the wheel arch liner.
Remove the A screws.
The new bulb must have identical specifications to
the original light bulb. The name of the bulb is
marked on its base.
After changing a bulb in the low beam, high beam or
fog light, have the headlights adjusted by a special-
ist garage.
50
Lighting, windscreen wipers and washers
English 
