Advertisement

Advertisement

Lighting, windscreen wipers and washers -> The Coming Home, Leaving Home functions for Your Volkswagen Virtus 4 Door First Generation (2018-2023)

opened. The warning signal stops after a few sec-  
onds or when the driver's door is closed.  
Parking light function  
Use  
The Corner function  
Double parking light  
The double parking light function switches on the  
sidelights when the vehicle is parked.  
Functionality  
Single parking light  
The Corner function is intended for turning or ma-  
noeuvring (e.g. when parking).  
The single parking light function switches on the  
sidelights on one side when the vehicle is parked.  
The function illuminates the area in front of the ve-  
hicle depending on the direction of travel.  
Operation  
Operating conditions  
Double parking light  
1. Turn on the ignition.  
The turn signal is switched on or the front  
wheels are turned sharply.  
2. Turn the light switch to the  
3. Switch off the ignition.  
4. Lock the vehicle.  
position.  
Low beam is switched on.  
The front fog lights are not switched on.  
The driving speed is below 40 km/h.  
When the parking light is switched on, an acoustic  
warning signal sounds after the ignition is switched  
off and the driver's door is opened. The warning sig-  
nal stops after a few seconds or when the driver's  
door is closed.  
The Coming Home, Leaving  
Home functions  
The lights may switch off automatically if the 12V  
vehicle battery is too low. If the parking lights on  
both sides are switched on with the ignition off, the  
lights will not be switched off automatically and the  
12V vehicle battery may discharge.  
Functionality  
Option 1  
Single parking light  
Applies to vehicles with automatic driving light  
switch function.  
The Coming Home function automatically turns on  
the light after the ignition is switched off and the  
driver's door opened. The light switches off auto-  
matically after the set lighting time has elapsed.  
The Leaving Home function automatically switches  
on the light when the vehicle is unlocked with the  
remote control.  
Option 2  
Applies to vehicles without automatic driving light  
switch function.  
A
B
Switch on the sidelights on the right.  
Switch on the sidelights on the left.  
The Coming Home function turns on the light after  
the ignition is switched off, when the function is  
manually activated and the driver's door opened.  
The light switches off automatically after several  
seconds.  
1. Switch off the ignition.  
2. Move the lever to the appropriate position.  
3. Lock the vehicle.  
The Leaving Home function automatically switches  
on the light when the vehicle is unlocked with the  
remote control.  
When the parking light is switched on, an acoustic  
warning signal sounds and the driver's door is  
Parking light function  
49  
CAUTION  
Operating conditions  
Halogen lamps are pressurised and may burst dur-  
ing replacement!  
Version 1  
Applies to vehicles with automatic driving light  
switch function.  
Wear gloves and safety goggles.  
·
NOTICE  
Visibility has worsened.  
Contamination of the halogen lamp reduces the life  
of the lamp  
The light switch is in the position  
.
Do not touch the glass of the light bulb with your  
bare fingers.  
·
Version 2  
Applies to vehicles without automatic driving light  
switch function.  
NOTICE  
The light switch is in the position  
.
Risk of headlight damage due to ingress of water  
and dirt  
Always fit the protective cap correctly on the  
headlight after changing a bulb.  
·
Operation  
Manual activation of Coming Home  
Conditions for replacing a light bulb  
Applies to vehicles without automatic driving light  
switch function.  
Ignition off  
Lights off  
1. Switch off the ignition.  
2. Briefly hold the left lever under the steering  
wheel in the  
position (switching on the  
headlight flasher).  
3. Open the driver's door.  
Front fog lights  
The wheel arch liner must be loosened to access the  
bulb.  
Settings  
Loosening the wheel arch liner  
The function is set in the following menu in the Info-  
tainment system:  
10" Infotainment system:  
Car Lights settings  
Replace light bulbs  
What you should be mindful of  
You may replace the following light bulbs yourself.  
Have the remaining light sources replaced by a spe-  
cialist garage.  
1.  
2. Fold down the wheel arch liner.  
Remove the A screws.  
The new bulb must have identical specifications to  
the original light bulb. The name of the bulb is  
marked on its base.  
After changing a bulb in the low beam, high beam or  
fog light, have the headlights adjusted by a special-  
ist garage.  
50  
Lighting, windscreen wipers and washers