5.6
Driving
PRND Buttons
[1] PARK: Press and release to select park once the vehicle is
stationary. The transmission will mechanically lock. If the vehicle key
is moved to position ‘0’ or removed from the ignition control while
the vehicle is at a standstill, the transmission will automatically select
park.
Always make sure that the park brake is ON.
It is not possible to select Park above 1.2 mph.
[2] REVERSE: When stationary and with the footbrake applied, press
and release to select Reverse. When reverse is selected, R will show
red in the Gear Position Indicator Display (GPID) (B) and a warning
will be heard.
[3] NEUTRAL: When stationary and with the footbrake applied, press
and release to select Neutral.
[4] DRIVE: When stationary and with the footbrake applied, press
and release to select forward gears.
If the brake pedal is not pressed the message centre will show
PRESS BRAKE PEDAL and a warning will be heard.
The left message centre (A) shows the current gear selection R, D1,
D2, etc., while the Gear Position Indicator Display (GPID) (B) shows
D (Drive), R (Reverse) or P (Park) according to current gear position.
While in auto drive mode the GPID will show ‘auto’.
Vehicle Rocking Motion
If the vehicle speed is less than 2.5 mph, reverse may be selected
from drive, without pressing the brake pedal, to create a vehicle
‘rocking’ motion i.e. to enable vehicle movement out of mud, snow,
etc. If 2.5 mph is exceeded then the transmission will automatically
select Neutral.
English 
