
5.19
Driving
If the satellite navigation is ON when reverse gear is selected the
screen will show the camera view until reverse gear is deselected.
When reverse gear is deselected the screen will continue to show the
camera view for approximately ten seconds or when the vehicle
reaches a speed of 16 kph (which ever is sooner), then return to the
satellite navigation screen. Press and release the NAV button to move
between the parking camera and satellite navigation screens, at any
time, while reverse is selected.
If the satellite navigation is OFF the screen will raise when reverse
gear is selected and lower when reverse gear is deselected.
The screen can be set to not raise when reverse gear is selected if the
satellite navigation system is OFF. Press MENU on the console and
navigate to <Car Settings... > Enter < Disable Cam. if nav off>. Press
ENTER to set the camera ON or OFF, press BACK to return to the
previous screen(s).
If the camera is set to OFF when the satellite navigation system is
OFF, press NAV, at any time while the transmission is in reverse gear,
to raise the screen and operate the camera, if required.
At any time while in reverse gear, press and hold the NAV button to
lower the screen, if required.
Camera Operation
The camera overlay shows the fixed movement angle of the rear of
the vehicle with the road wheels on full lock (D) red lines and the
actual movement of the vehicle road wheels (C) yellow lines. As the
steering wheel is turned the yellow lines will show the predicted
vehicle movement.
The outer edge of the two markers (E) show the width of the vehicle
including the mirrors.
The distance from the beginning edge of the two markers (E) to the
rear of the vehicle is 12 inches (B).