Audi A1 2011 ➤ , Audi A1 Sportback 2018 ➤ , Audi A2 2001 ➤ , Audi A3 20 ...
Electrical Equipment General Information - Edition 08.2019
4
ESD Work Surface - VAS6613-
⇒ “4.1 ESD Work Surface VAS6613 , Using”, page 175
4.1
ESD Work Surface - VAS6613- , Using
♦ The electro-static discharge -VAS6613- protect electronic
components from getting damaged by an electro-static
charge.
♦ This makes is possible to perform repairs on sensitive elec‐
tronic components on an open mat.
♦ For more information as to what work can be performed on the
-VAS6613- . Refer to the "Electrical Equipment" chapter in the
repair manual.
– Place the electro-static discharge mat -3- from -VAS6613- on
a clean, dry table.
– Connect the Ground (GND) -2- to one of the buttons on the
mat.
– Connect the GND connector adapter -1- to the adapter con‐
nector on an outlet with contact protection or connect the
alligator clip to a ground in the building or a water pipe.
– Connect the wrist strap -4- to one of the buttons on the mat.
– Attach the wrist strap directly to your wrist - never to your shirt
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
sleeve or jacket sleeve.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Caution
If working on especially sensitive electronic component and
with the pad exposed, use only non-magnetic tools, for exam‐
ple, a -T10072- .
4. ESD Work Surface VAS6613
175
English 
