Descriptive and Repairability Manual
Audi A3 2000
•
•
Handlesupportand lockcylinder(1 stapleand
1 connector)
Lock (2 screws, 1 electrical connector and 1 connector)
tire).
Locking plate (pressure type).
Upper rear door frame (to pre-
session on a pivot.
Accessibility
Figure 35 shows the accessibility of the door for
its repair.
•
•
M a l a
accessibility
•
•
•
•
•
•
•
Exterior sleeve (7 staples).
Upper outer frame (stuck).
Lower outer frame (2 screws and 7 staples).
Impact absorber (stuck).
Side protection bars (2 screws each).
Two soundproof plates (stuck).
Electrical installation (7 staples, 1 cable pass and pass the
cables through the hole).
Good
accessibility
•
•
Clips and plugs (7 pressure support rubbers).
Door.
Figure 35 Accessibility of the door
If you choose to repair this part, it must be disassembled.
Preliminary operations for replacement or repaironly take the necessary accessories based on the
magnitude and location of the damage.
from the front door
For the replacement or repair of the door, it must be...
assemble the following elements:
•
•
•
Handle frame (1 guide and 1 screw).
Interior handle (press and 1 staple).
Door cover (4 screws, 2 connectors, and 7 guides)
deras).
•
•
•
•
•
•
•
•
•
Soundproofing for glass lift motor (under pressure).
Mirror housing (pressure fixed).
Mirror soundproofing (under pressure).
Door frame.
Remove electrical installation (2 connectors and 5 clips).
Remove inner handle cable (1 clip).
Safety rod (1 staple).
Mirror soundproofing (3 pressure pivots).
Lock protector (pressure at 2 points and 1 spacer)
•
Door handle with grip (1 staple and 1 pin).
26
English 
