Descriptive and Repair Manual
Audi A3 2000
To rain the
hinge
•
•
•
•
Network mount support fixing bracket (4 screws).
Electrical installation (4 staples).
Pneumatic installation (4 staples).
Section the reinforcement of the exhaust hopper (only
for the canvas).
•
•
MIG cord (for the panel only).
Lower bracket of the front post (1 screw and 2 gra-
step).
•
•
•
•
Stirrup frame (6 staples).
Pressure seat cushion.
Side strip (8 staples, 2 guides, and 1 connector).
Skull pit.
Figure 54 Union of the trunk lid
Accessibility
Figure 55 shows the accessibility of the trunk lid.
Trunk lid
Marketing
M a l a
accessibility
The manufacturing plant sells the trunk lid as a part.
independent spare parts.
Good
accessibility
Tapachula
Figure 55 Trunk Lid Accessibility
Preliminary operations for replacement or repair
Forthereplacementorrepairofthetrunklid,itmustberemoved.
assemble the following elements:
•
•
•
•
•
Trunk lid cover (2 screws and 7 staples).
Interior frame molding (8 staples).
Cleaning arm cover (pressurized).
Rear wiper arm (1 nut).
Cleaning arm motor (1 electrical connector, 1 conec-
water tower and 3 nuts.
Figure 53 Marketing of the trunk lid
Union of the piece
•
Trunk lid handle (2 screws, 2 nuts and 2 co-
connectors).
Opening mechanism and handle (4 staples, 1 connector)
electric and 1 tire.
The trunk lid is attached to the body using two bolts.
the hinges to each hinge and these with a nut to the body.
•
•
Brake light (1 connector, 1 screw and 1 guide).
34
English 
